Submit search
This GC Electronics Super Glue is a 2 Part Epoxy Adhesive that sets in 5 to 6 hours. The 10-100 is a versatile epoxy cement particularly suitable for cementing non-porous materials. Cures at room temperature. Bond strength of over 3000 psi. Will not shrink through curing. Resistant to water, solvents, heat, cold and fungus. Excellent dielectric properties. Mix in equal parts from two tubes.
Manufacture Part Number: GC Electronics 10-100
GC 10-114 Quik Stik sets in 5 minutes and is a clear, fast curing epoxy adhesive. In view of its short pott life, use is recommended when a single repair must be made and the mixed adhesives can be used within one or twominutes. Cemented items can be safely handled within eight to twelve minutes, with full hardness obtained after several hours. This cement is relatively thin in consistency and should be used to cement closely matching surfaces. The glue line is usually invisible.
GC 10-1206 Luberex is known as The Modern White Lubricant. Superior calcium stearate base grease compound for general use in industry, the shop or at home. Provides excellent lubrication for bearings, appliances, hand tools, bicycles and other sporting equipment including fishing reels and guns; also for business machines, instruments and automotive lubrication. Excellent dielectric properties.
GC Part No. 10-1206 2 fl. oz. Tube
GC Electronics 10-150 is a high strength clear silicone rubber. It weatherproofs, waterproofs, seals, bonds and stays flexible.
This GC 10-1762 Insulating Coating is an air-dry, synthetic rubber coating that can be easily applied by spraying, brushing or dipping. Insulating Coating resists moistures, acids, abrasion, weathering, electrical shock, skidding/slipping, corrosion; coats and give a comfortable, controlled, color coded grip to all types of tools, lawn and garden, mechanical, electrical, woodworking and masonry.
The GC 10-347 is a 2 part epoxy glue that sets 5 hours. It provides an exceptionally hard and strong bond. Good dielectric properties. Gray-white in color with fillers added to increase viscosity and make it thixotropic (non-running). May be used to fill gaps or to replace broken sections. Bonds may be over-filled and filed or sanded after curing.
The GC Electronics 10-3702 is a innovative solution, composed of pure polystyrene in solvents, dries quickly to form a clear and reliable coating on coils and transformers. The 10-3702 coating has little to no impact on inductive values. Not just limited to coatings, it can also serve as an excellent cement for various polystyrene items, whether molded or fabricated. Discover the versatility and effectiveness of GC Electronics 10-3702 for all your protective and bonding needs!
GC 10-8101 Silicone Dielectric Compound. Soft, inert silicone grease with excellent dielectric properties. Usable over a wide range of temperatures. Its consistency is vaseline-like and it is clear translucent in color. It provides an excellent dielectric coating which excludes moisture and prevents high voltage arcing. Applicable to components in the high voltage section of TV receivers. Protects ignition systems in automobiles and boats, in addition to providing an outstanding corrosion resistant coating on exposed metal surfaces, such as TV antenna terminals as well as general rustproofing. This compound also makes an excellent lubricant for rubber or plastic. Part No. 10-8101 1 fl. oz. Tube
GC 10-8108 Heat Sink Compound is a industry standard zinc oxide filled silicone heat sink grease for most applications. Will not soften at elevated temperatures or dry out or harden.
Meets Mil. Spec. C-47113
6.5 gms. avdp. Tube
Red Insulating Varnish Protective Coating 2 fl. oz. Bottle
3M Spray 90 is a industrial grade spray adhesive that is typically used for bonding HPL to wood.
GC 19-2302 White Lithium Grease. White, lithium soap base grease lubricant that provides superior lubrication and reduces friction and wear to a minimum. Suitable for use on wiping contacts. It retains consistency over a wide range of temperatures, will not oxidize or harden and provides outstanding protection against corrosion. Part No. 19-2302 1 3/4 . oz. Tube
HARDMAN Fast-Setting Epoxy is an extra fast setting, two-component, room temperature curing epoxy adhesive. The system will cure at as low as 18 C (0 F). It has a convenient mix ratio, excellent cohesive strength and bonds to most substrates including metal, wood, concrete, ceramics and many plastics. It is recommended for fast patching, fixturing and other repairs requiring quick handling strength.
Metal: Carbon Steel, Stainless Steel, Aluminum Plastic: Epoxy Other: Stone, Wood, Glass, China, Leather
TYPICAL USES: HARDMAN Fast-Setting Epoxy can be used to repair tools, auto parts, electrical and electronic components, furniture and other applications that require a fast-setting adhesive.
PACKAGING: The DOUBLE/BUBBLE package is a handy, dual-pouch, one-shot, job-size packaging concept. It reduces the waste typically associated with the use of larger quantities of two-component adhesives. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.
Philmore Electronics part number LT-30379
GC Bond is a general purpose cement which is useful both on porous and non-porous materials. It adheres well to metals, glass, plastics, leather, wood & cardboard. The 10-4302 has excellent resistance to water. The cemented joint is flexible and tough.
The Calrad 90-100 Tech Mag Magnetic Disk Fastener Mount easily mounts all types of electronic hardware to any flat surface you want, in AV Racks, AV Rack Shelves, AV Rack Panels, behind TV's, mounts directly to steel TV mounts while providing the flexibility to move the hardware anywhere you want. Simple to remove hardware when needed to make changes to cables, device settings or to relocate and to re-wire when necessary. The ‘Tech Mag Mount’ and steel plate uses 3M's new industrial grade adhesive for maximum strength and reliability. No electrical interference is created from the 'Tech Mag Mount' so all of your electronic hardware will work correctly. One 'Tech Mag Mount' and one 1.5" round steel plate per standard package. it is very important that the surface for both mounting pieces be flat and cleaned with rubbing alcohol for the " Tech Mag Mount" to perform correctly. Available in bulk or packaged