10-117 Calrad Amplifier Fiber Optic Toslink-Toslink With Power Supply
FIBER OPTIC AMPLIFIER
This unit minimizes optical signal loss when long cable runs are used to connect optical
digital audio devices. Input signal delivery 5m, output signal delivery 20m. VDC power
supply included. Size: 2.8"L x 1.82"W x .88"H. Color is light gray. Calrad 55-502-5OFT
50' fiber-optic cable is available.
15-139 Calrad Stereo Headphone Amplifier, 4 Channel
Calrad Electronics 15-139 Stereo Headphone Amplifier, 4 Channel, Individual Volume Controls
This Calrad 4 Channel Stereo Headphone Amplifier is perfect for use in recording studio or educational applications. Works directly with 1/4” TRS phone jacks using 8-100 ohm impedance stereo headphones. Each channel uses Texas Instruments RC4580 Ultra low-noise series op amps that deliver outstanding audio performance with low distortion. Provides stereo audio for individual or multi-person listening environments. Each channel can be adjusted independently with individual volume controls.
40-1030 Calrad HDCP Compliant DVI Repeater
Cascade units and deliver signals up to 150 ft. Works with PC or HDTV Devices
Specifications:
Input/Output Connectors.......................DVI?Female Jacks Rear and Front
Bandwidth..HDCP....... Compliant, 480I, 480P, 720P, 1080I (25 - 165 Mhz)
Maximum Resolution................................................. 1600 X 1200 at 60 Hz
Distance. (Using High Quality Cables) Total 100 -120 ft.Cascade to 150 ft.
AC Power Supply/Connector..............9VDC 600 mA with 2.1mm coax jack
Dimensions/Color............................4 1/8"W X 3" D X 1 1/8" H Silver Color
Please note! Not all manufacturers are consistent with the specifications issued by the DDWG DVI 1.0 standard. Some equipment may not be able to achieve distances of 150 ft. Shorter length may be required, reducing the ability of the Calrad 40-1030 unit to reach longer distances. It is recommended to test the amplifier and cables prior to installation.
40-1060-4 Calrad DVI Distribution Amp 1-4
PC \ HDTV 4 Port DVI \ HDMI Splitter
Compact 1 RU size metal case, includes 19" rack mount ears. DVI Connectors, 1 input to 4 HDCP DVI 1.0 Compliant outputs Cascadeable design for connecting multiple units Supports HDTV 480P,720P and 1080I. The DVI Splitter will ONLY pass DVI-D (DVI Digital) or HDMI type video signals. PC UXGA (25 - 165MHz) Use Calrad 35 series adapters for HDMI signals. (Video only)
Specifications:
Frequency Bandwidth: ..................................................................1.65 GHz
DC Power: ......................................................................7.5VDC, 1.5 Amps
Supported HD Graphic Resolutions:...............................480P, 720P, 1080I
Supported PC Resolutions: VGA, SVGA, SXGA, UXGA(1600 X 1200) 60Hz
Connectors: .......................................5 Female 24+5 pin DVI Female Jacks
Dimensions........................................ Depth: 6.0", Width: 10.5", Height: 1.6"
Weight.......................................................................................................1 lb
Online Price: $250.00 SHIPS FOR FREE!
40-1061-HS-2 Calrad 1 x 2 3D HDMI Distribution Amplifier
The Calrad 40-1061-HS-2 is a one input to two outputs HDMI splitter, distributes one HDMI source to two HDMI displays simultaneously. It offers solutions for HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
40-1063-HS-2 Calrad 2-Way HDMI Splitter - 1080P & 4K
Calrad 40-1063-HS-2 2-Way HDMI Splitter
This 2-Way HDMI splitter provides a simple solution for distribution of a HDTV 1080P or UHD 4K x 2K HDMI
signal. A single HDMI source can be split into two separate HDMI outputs. Two L.E.D. Signal indicators provide HDMI
signal connectivity on Outputs 1 and 2. Selectable EDID settings, see the typical hookup diagram below. Includes
5Vdc, 1 Amp power supply.
Specifications:
Video Resolution: Up to 4Kx2K(3840x2160@60Hz YUV 4:2:0)
Input Bandwidth Frequency: 10.2Gps
Supports: 3D, 36 Bit Color
Supports four kinds of EDID settings: mixed EDID, copy EDID, default
1080p output, default 4Kx2K output.
Audio: Supports LPCM 7.1, Dolby TrueHD, Supports LPCM 7.1, Dolby Digital
Plus,TrueHD Master Audio.
Power: 5Vdc
Size: L-2.95” x W-2.67” x H-.992”
40-1063-HS-4 Calrad 4-Way HDMI Splitter - 1080P & 4K
Calrad 40-1063-HS-4 4-Way HDMI Splitter
This 4-Way HDMI splitter provides a simple solution for distribution of a HDTV 1080P or UHD 4K x 2K HDMI
signal. A single HDMI source can be split into four separate HDMI outputs. Four L.E.D. Signal indicators provide HDMI
signal connectivity on Outputs 1 thru 4. Selectable EDID settings, see the typical hookup diagram below. Includes
5Vdc, 1 Amp power supply.
Specifications:
Video Resolution: Up to 4Kx2K(3840x2160@60Hz YUV 4:2:0)
Input Bandwidth Frequency: 10.2Gps
Supports: 3D, 36 Bit Color
Supports four kinds of EDID settings: mixed EDID, copy EDID, default
1080p output, default 4Kx2K output.
Audio: Supports LPCM 7.1, Dolby TrueHD, Supports LPCM 7.1, Dolby Digital
Plus,TrueHD Master Audio.
Power: 5Vdc
Size: L-4.5” x W-2.44” x H-.984”
40-6950 Calrad CAT5e Component/Composite Video/Digital/Stereo Audio Transmitter
The 40-6950 is a CAT 5 based component video, composite video, PCM digital audio and stereo audio distribution amplifier transmitter. Designed to work together with the 40-6920 or 40-6930 receiver units. The receiver unit can be up to 1000 ft away from the transmitter unit. The transmitter has RCA Inputs and RCA loop outputsas well as buffered RJ 45 outputs. Will support HDTV resolutions of 480P, 720P, 1080I and 1080P. Transmission distance for 480P 1000 feet, 720P 600 feet and 1080I or 1080P 450 feet.. 12 Vdc power supply included.
40-930M Calrad 1X8 S-Video Distribution Amplifier
Calrad 40-930M 1X8 S-Video Distribution Amplifier
The 40-930M 1 X 8 S-Video (Y/C) with Analog Stereo Audio and Digital Audio Distribution Amplifier has one Input for S-Video and Gold Plated RCA jacks for composite video and audio. Eight outputs are also S-Video and RCA composite video and audio.
Video amplifier bandwidth: 700MHz.
Digital audio bandwidth: 110MHZ.
Audio frequency response: 20Hz - 20KHz.
Power supply: 12VDC; 1.2mA included.
Dimensions: Length 6.4” x Width 17” x Height 1.75”
40-937B Calrad 1 X 4 AV Distribution Amplifier for Component Video and Audio
The Calrad 40-937B is a economic 1x4 HDTV Audio-Video Distribution Amplifier
The 40-937B 1X4 component video amplifier with stereo audio allows you to distribute low-noise, low-distortion HDTV component video and analog audio signals to four destinations. Amplified, broadband circuitry eliminates signal loss and assures true one-to-one ratio, low noise, low distortion, unity gain audio and video distribution, and are capable of transmitting signals for cable runs of up to 150 ft. One additional amplifiers may also be cascaded for system expansion. Includes 12Vdc, 500ma power supply.Tabs with 4x4 mounting holes. Front panel L.E.D. indicator. Please note !Tthis distribution amplifier will not work with passive component balun systems.
Specifications:
- Video Input Impedance: 75Ώ +-5%. Output Impedance: 75Ώ +-5%
- Video Insertion Loss: 50Hz to 10MHz<.40dB.Video Bandwidth: >100MHz
- Audio Input Impedance: 47K
- Audio Response: >100kHz. Frequency Response: 20Hz to 100kHz
- Signal to Noise: 100 dB@ 2Volts out
- Size: Length 7.5” x Width 3.5” x Height 1.25”
40-939B Calrad 1 X 9 Universal Distribution Amp with Loop
1x9 HDTV Audio-Video Distribution Amplifier
The 40-939B is a high quality 1X9 HDTV and analog video distribution amp that can transmit digital or analog audio as well as component and composite video signals to five locations up to 150 ft. the Calrad 40-939B has a loop output giving it the ability to be daisy chained to other units, allowing for longer cable runs and AV distribution to more than 5 displays or to feed a local monitor. If the digital audio port is not used it can be used for standard composite video. 9VAc power supply is included. Front panel L.E.D. power indicator.
Specifications:
Input impedance: 75Ώ + 5% Output impedance: 75Ώ + 5%
Video bandwidth: > 100 MHz Audio response: > 100 KHz
Input impedance: 22k ohm Output impedance: 1k ohm
Frequency response: 20 Hz to 100 KHz Supports standard SPDIF digital audio Power Supply: 9VAC@1000 mA.
Size: Length 9.6" x Width 4.5" x Height 1.25"
40-950 Calrad Stereo Audio Line Pre-Amplifier
40-950
Stereo Audio Line Pre-Amplifier
Calrad's compact stereo pre-amplifier is ideal for audio distribution systems where sources may have different output levels. The small size and attached mounting tabs make it easy to install the amplifier in the wall, directly behind video displays or in equipment racks. The output and input are L+R RCA jacks. Adjustable volume control. Adjust the pre-amp gain so your source is matched with the others before entering your distribution or zone amps.
40-YDO2A Calrad Audio Video Distribution Amplifier, 1 x 2 Component
This Calrad 40-YDO2A 1 x 2 component video audio amplifier with stereo audio allows you to distribute low-noise, low-distortion HDTV component video and analog audio signals to four destinations. Amplified, broadband circuitry eliminates signal loss and assures true one-to-one ratio, low noise, low distortion, unity gain audio and video distribution, and are capable of transmitting signals for cable runs of up to 150 ft. One additional amplifiers may also be cascaded for system expansion. 12Vdc, 1A power supply. Front panel L.E.D. indicator. Works well with all active and passive component balun systems.
75-486 Calrad UHF/VHF/FM Amplifier 36db Amp
UHF/VHF/FM AMPLIFIER - 36dB
Amplifier with adjustable gain control. 36dB amp.
Switchable FM attenuation trap, ON-OFF indicator light.
Frequency response of 5 to 900 MHz.
Size: 1.47"(H) x 2.93"(W) x 5.65" (L)
Product No Longer Available
8-Way HDMI Splitter - 4Kx2K@60 (YUV4:4:4) 3D, Ultra HD 1x8 | 40-1063-HS-8 Calrad Electronics
The Calrad 40-1063-HS-8 (8 Port) 4K x 2K distribution amplifier provides a single source to be distributed to multiple displays or to HDMI signal based hardware. Individual L.E.D. signal indicators for each channel. Reliable video signal delivery with advanced EDID management circuitry. The built-in TMDS signal amplifier can send HDMI signals up to 50 feet, but for longer cable runs, use compatible HDMI balun extenders. Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio formats. Perfect for 1:1 video signal delivery with 8 outputs for large scale commercial applications. Includes wall mounting hardware.
Online Price: $169.23 SHIPS FOR FREE!
95-2035-IR Calrad Stereo Digital Amplifier, IR Controlled, 30 Watt
The Calrad 95-2035-IR digital amplifier provides many solutions for residential and commercial single-multi zone audio applications. It’s small compact size makes it perfect for behind displays, cabinets and equipment racks where space is limited. Perfect for use in offices, classrooms or conference rooms, etc. Optional external IR receiver control or direct IR input for connecting to IR repeater\distribution systems or 3rd party control\automation products. High efficiency class ‘D’ technology with low power consumption circuitry for distortion free reliable audio reproduction. IR controlled power, volume up, volume down, mute. Visual L.E.D. indicators for power, IR status, mute and audio output level. The volume control rotates manually or moves automatically when using the IR remote control.
95-2038 Calrad Electronics | Stereo Amplifier, 15 Watt
The Calrad 95-2038 Miniature audio amplifier is perfect for home, office or commercial installations. Selectable microphone and line level inputs by a 2 position slide switch. Removable 4 position solderless screw terminal speaker connectivity block. Rotary style volume control for input signal attenuation. Red power L.E.D. indicator. Low noise, super efficient class ‘D’ amplifier design. DC power supply included. Fits easily behind TV displays or in small equipment spaces.
In the box: 1 x 95-2038 15 Watt Stereo Amplifier, 1 x 12Vdc Power Supply, 1 x Instructions
95-830 Calrad 6W Stereo, 12-15 W Mono Amplifier
95-830 POWER AMPLIFIER
This power amplifier is a very versatile high fidelity amplifier and has many useful applications. A few of these are
as follows: A power amplifier for Walkman or similar type of AM/FM stereo headphone radio, they can be
converted into a high powered stereo system for home use. This can easily be done by connecting the headphone
output from the radio to the input control of the amplifier. As a power amplifier for the auto, van, camper, trailer
and boat, or as a portable system for outdoor use. A public address amplifier for both indoor and outdoor.
Specifications
DC Voltage ................. 12 to 15V
Input Sensitivity ............... 0.6V at full output
Frequency Response .............10 to 25 kHz
Power Output.............. Mono: 15W at 8-ohm. Stereo: 6W
Input Impedance ................ Low Z
Distortion.............. 1% @ full output
