Calrad 10-105 Stereo Inline Variable Audio Attenuator
This Calrad 10-105 can be inserted into any Hi-Z audio path, provides signal attenuation from 0db to full signal. Helps to
balance audio signals from different pieces of equipment. Low profile design with easy to read volume control. RCA
Male to female cables are provided for easy Interfacing with equipment, this allows the unit to be hidden or exposed.
Passive design requires no external power supply.
Specifications:
Frequency Response .............. 20hz - 20Khz
Cable lengths input, output........... 15" each
Signal Level..... odb - Full input signal level (avg. 200-400mv)
Dimensions.............. 3.1"W x 1.3"H x 1.1"D
Input Connectors.......... Male RCA plugs (left=white, right=red)
Color............. Black
Output Connectors ... Female RCA jacks (left=white, right=red)
10-106 Calrad Speaker Level to Line Level Converter, 60 Watt Stereo - Passive Device
Calrad Electronics 10-106 Speaker Level to Line Level Converter, 60 Watt Stereo - Passive Device
Use the Calrad 10-106 adapter to convert a speaker-level signal to a line-level signal. It's perfect for sending the amplified output of a multi-room audio system to a more powerful amplifier, or adding a second amp to power more speakers. The adapter features a four-conductor terminal block for left + right speaker wire inputs and female RCA stereo left + right output jacks. Setup: (Output with no speakers used from amplifier) The output level from the amplifier should be set at minimum level setting first to avoid over driving the 10-106 converter, this will also prevent the amplifier from pushing out more wattage then needed. Next adjust the 10-106 gain controls to achieve the desired signal conversion to line level. Setup: (Output with speakers used from amplifier, 10-106 parallel speaker connection) The output of the amplifier should be set at the normal output setting that will be used on a regular basis, then adjust the 10-106 gain controls to achieve the desired signal conversion to line level. Note! That any significant change in the amplifier signal output will have a direct effect and change in he signal output of the 10-106 converter that could result in a distorted line level output.
Works with these Calrad Audio Baluns:
40-DA01, Passive Balanced RCA Signal Converter: 40-DA01
40-DA02, Passive Balanced RCA Signal Converter with PIGTAIL : 40-DA02
95-1046-S, Stereo RCA Audio Balun Over Single Cat5e/6 Cable: 95-1046-S
95-1046-S1, Stereo Analog Ground Isolation Audio Balun with IR, RS232, RS422 or RS485 Connectivity : 95-1046-S1
Specifications:
- DC Power: None (Passive Device)
- Input Impedance: 4-8 Ohm
- Maximum Input Power: 60 Watts
- Frequency Response: 20-20Khz
- Isolation: Transformer based
- Grounding: Independent speaker grounds, independent line level grounds
- Output Level: 200-300mv, Gain 0-2Vpp
- Input Jack: 1 x 4 Position terminal block (Accepts up to 20-24 gauge wire)
- Input Cabling: Use 20-24 AWG speaker cable
- Output Jacks: 2 x RCA female (White & Red Inserts)
Product No Longer Available
