Submit search
Stereo RCA Audio Balun Adapter over Single CAT5E/6 Cable
Stereo Analog Audio Ground Isolation Balun with IR, RS232, RS422 or RS485 Connectivity - Sold in Pairs.
This Calrad 95-1046-S1 Audio-IR-Data Pigtail Balun is ideal for residential, corporate A/V, schools, home theater applications and any other situation involving structured audio distribution that transmits stereo audio signals via Cat.5e/6 UTP cable. This Balun provides a low cost and versatile UTP cabling solution for any analog audio distribution system. Each audio channel transmission signal is completely isolated with transformer based circuitry from start to finish eliminating any issues with ground loops or audio 60hz hums. The balun also has a single 3.5mm IR signal path for bi-directional signal communication and also a cable pair for data-control communication that supports RS232, RS422, RS485. Easy bi-directional connectivity either balun can act as a transmitter or receiver. Use standard pre-made Cat5e, Cat6 cables or terminate your own cabling using the 568A standard start to finish or the 568B standard start to finish. Distances of up to 250ft., see detailed specifications below. Please Note! All 4 pairs \ 8 conductors of the RJ45 connector are used and no spare connectivity is available.
Tech Note: The RS232 Data wires can also be used for additional IR signals and low current Relay trigger connectivity
Calrad 95-1146 | Component Video Stereo Audio Extender Over Single Cat5e Cable - Sold as a Pair
Calrad’s new line of audio/ video baluns provide a simple low cost method of delivering composite video and stereo audio over UTP cable. 25k Gold plated jacks. Chassis: ABS Plastic. Extend your Component Video + L, R Audio overCat5e/6.
Calrad 40-2000 HDMI Extender up to 150ft. over a single UTP Cable.
Calrad 40-2000-IR HDMI & IR Extender up to 150-ft over single UTP Cable.
Calrad 40-101 Gen3 | New Generation of our QAM Technnology with new features and technology improvements,(QAM 100 Channel Transmitter and 100 Channel Receiver Modulator System with IR):
This unit is part of a large HDTV video distribution ECO system with up to 100 independent HDTV 1080P channels. Works with additional Calrad 40-101T Gen3 (QAM) Transmitters and with additional Calrad 40-101R (QAM) Receivers. Calrad has developed a simple expandable 1080p video delivery system with control signals over coax, Cat5e or Cat6 cabling with distances up to over 2,000 ft.. The technology can also support existing legacy wiring such as standard shielded audio, composite, component, HDMI cables using specific inline adapters for each cable type. Once connected the HDMI transmitter and receiver can connect a source to a display that can be totally independent from each other or multiple 40-101 units can be used providing signals upstream and downstream from each other, bidirectionally over the same wiring. Each transmitter and receiver can be IR controlled individually from a 3rd party automation control system or Calrad's Xcontrolled automation system or by a local individual IR receiver from a local remote (Included). Easy setup, set transmitters and receivers to independent channels manually on the front panel using the up/down push buttons or use a automated control system to maximize the flexibility using 100 channels between transmitters and receiver. Supports CATV digital splitters and amplifiers.
New Added Features that legacy 40-101, 40-101 Gen2 QAM hardware did not have.1. IR remote with OSD Menu that shows channel information2. OSD Menu appears when changing channels3. Transmitter and Receivers with RF Input \ Output connectivity jacks that help minimize the need for RF splitters, combiners, etc..4. Front panel lock functions to prevent users from changing or modifying settings on the front panel5. Upgradeable Firmware, rear panel USB Jack6. Rear panel USB Jack for external USB Hardware7. Vented chassis for better airflow, reduces overheating in higher temperature environments8. Individually addressable IR ID Control codes
The Calrad 40-130 provides the ability to easily rack mount Calrad's "U" based chassis, for example hardware like our QAM 40-100, 40-101 series QAM devices and 2 Wire HDMI devices. Mix QAM and 2 Wire transmitters and receivers as needed for your installation. See below for a typical rack setup for a sports bar using QAM Technology to deliver 12 HDMI Direct TV video feeds to multiple locations. Use Xcontrolled software with PC Laptops, Android and Apple devices to easily manage and control Direct TV set top boxes by IR or IP controlled protocols, control TV displays with IR or RS232 protocols.
Calrad's fiber solution provides long distance full spec., HDMI 4K uncompressed signal transmission for pristine video signal delivery. 55-690 Series Single Mode Fiber, available in lengths of 50 ft., 100 ft., 150 ft., 200 ft., 300 ft.. Use Calrad's 72-209 Fiber Optic LC Female to LC Female Coupler to make different lengths of fiber cables.
Package Contents: 1 x 40-2020 Transmitter, 1 x 40-2020 Receiver, 2 x DC Power Supplies, 1 x IR Receiver, 1 x IR Emitter
The Calrad 2 Wire technology system provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. With the 40-204 many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter.
The Calrad 40-204R is used with the 2 Wire technology system that provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. Many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single 40-204 transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter. Check out our new MagWire miniature 2 conductor 45 gauge cable that is available in various lengths and provides unique problem solving solutions for running this cable.
Calrad 40-206 | 1080P (2 Wire 4 Port Signal Splitter): This splitter uses small terminal block connectivity to distribute 2 Wire signals, provides a simple method of connecting a single 40-204 2 Wire transmitter to four 40-204 2 Wire Receivers for signal distribution. In specific configurations and shorter distances, up to six 40-204 Receivers may be connected to the 40-206 Splitter. Ports 1-4 are for standard connectivity, ports 5-6 expansion ports are available for specific configurations, please consult Calrads tech support for further details. Easily mounts with double stick adhesive tape, (Included) or easily attached to wiring harnesses or rack hardware by using cable ties.
The Calrad 40-300 series HDMI over IP provides 1080P HD video signals over UTP network cabling. Many configurations are possible, 1.) Between a single transmitter and receiver directly without a network switch. 2.) Use multiple transmitters and receivers over an existing or separate network to create a small to large scaleable video distribution system. Up to 56 channels are possible. Using standard network switches can be used with existing networks and internet, if more than 3 transmitters are used on a 100Mb system, it is advisable to use specific 1Gb IGMP network switches to manage the signal bandwidth properly for new or existing installations. Transmitter ID addresses are easily selectable using the front panel 6 position dip switch. Receiver channel addresses are accessible by using a 12 button credit card size remote control only, to change channel addresses. Use the up down keys or direct channel address keys 0-9 to change to the desired channel. Two interface adapter cables are included for 3rd party home automation control. A full duplex bi-directional RS232 port is available for easy serial communication between devices. Easily create a virtual matrix switcher over IP with unlimited possibilities. A HDMI signal loop-output on the Transmitter is provided for continuous signal transmission to other devices.
This Calrad 40-YE0ID HDTV Balun system is designed to transmit Component video (Y,Pb,Pr), selectable switch for digital audio or IR signals over a single Cat5E/6 cable up to 1000 ft for a 640 x 480 resolution. Supports 480I/P, 720P and 1080I. Video bandwidth DC to 60MHz. Two units required, Bi-directional signal system. Passive design with no power required. 4 x RCA Jacks, 1 x removable 2 pin terminal block. Color: black. Size: 3.5” (L) x 2.2” (W) x 1” (H).
The Calrad 40-2015 balun provides a single UTP category 5e/6 cable solution to deliver pristine digital signals from all HDTV formats and signal sources from 480i/p to1080i/p, 4K x 2K \ 60hz. Provides IR and EDID support to the receiver for a single cable solution.
Package Contents: 1 x 40-2015 Transmitter, 1 x 40-2015 Receiver, 1 x DC Power Supply, 1 x IR Receiver, 1 x IR Emitter
Extends an HDMI signal over a single CAT5e or Cat6 cable. HDCP and HDMI 3D compliant. HDMI mode, LPCM 7.1, True HD, DTS-HS or stereo audio modes. Sold as a transmitter and receiver set. 5Vdc power supplies included. Note: Only Cat 6 Cable Delivers 3D! Specifications: Video Resolution 480P, 720P, 1080P Distance: 100 Meters HDMI In\Out Connectors DC Power Supply: 5Vdc, 2A Receiver-Transmitter Size: Length 5.125" x Width 3.5" x Height 1.25"
The 40-6950 is a CAT 5 based component video, composite video, PCM digital audio and stereo audio distribution amplifier transmitter. Designed to work together with the 40-6920 or 40-6930 receiver units. The receiver unit can be up to 1000 ft away from the transmitter unit. The transmitter has RCA Inputs and RCA loop outputsas well as buffered RJ 45 outputs. Will support HDTV resolutions of 480P, 720P, 1080I and 1080P. Transmission distance for 480P 1000 feet, 720P 600 feet and 1080I or 1080P 450 feet.. 12 Vdc power supply included.
Calrad's 40-CVO1A HDTV Balun system is designed to transmit component video (YPbPr) and digital audio over a single Cat-5e cable. Supports 480i, 480p, 720p, 1080i. Two units required, bi-directional signal design. Features:
Video Balun Composite video and stereo audio over Cat5e extender on a designer style insert. Passive balun wall plate allows you to send composite video and stereo audio up to 1000 feet over a single Cat5e UTP cable. No power required. Dimensions: 11.5mm X 71mm. Sold in pairs.
Balanced Passive Signal Converter with 4" wire pigtail Passive bi-directional signal design using UTP Cat5e or Cat6 cable pair. Use for Audio\Video\Component\IR signals. Cable Distance: Analog Audio, 1000 ft. Digital Audio, 300 ft. IR Signals, 300 ft. Composite video, 1000 ft., High Definition 480P - 300 ft., 720P - 200 ft., 1080I -100 ft., 1080P - 50 ft. Wire Termination 40-DA02: 2 conductor locking style punch down blocks for easy wire Specifications Bandwidth: DC to 50Mhz, DC passive Connectors: RCA Male Plug Signal Types: Analog+Digital Audio \ Video \ IR Signals Housing Material: Plastic, Color: Black Dimensions: 1.76"(L) x .68"(W) x .68"(H) Dimensions: Length 1.32" x Width 0.6" x Height 0.6"
