Submit search
In addition to the features you’ll find in traditional tone generators, the 100B brings you a referenced, audible beep rate to measure resistance levels from 0 to 10MΩ.You can perform basic line diagnosis using only one tester.
100B UPC. No. 08667
Used in conjunction with any tone generator, this Greenlee Tone Probe Amplifier permits wire and cable identification without having to make direct metallic contact with the conductor.
The 200EP-G has a powerful speaker for noisy environments, recessed on/off button control and high gain for accurate wire identification in congested cable bundles and equipment rooms.
The Platinum Tools 21025C RJ-45 PortSaver extends the life of your tester by using the RJ45 PortSaver as your sacrificial cable. This eliminates the wear and tear from constantly plugging in and out of the tester port.
The Triplett 3399 is a cutting-edge multimeter designed for accurate electrical measurements. With features like voltage, current, resistance, and capacitance readings, this 3399 digital multimeter is an essential tool for electricians and technicians. Its rugged build ensures durability in various working conditions, and its user-friendly interface simplifies data collection. The Triplett 3399 is a reliable, versatile instrument for troubleshooting and maintaining electrical systems.
Specifications:
701K Includes:
All kit components are available individually
Permits technicians to identify the conductor within a bundle, at a cross-connect point or at the remote end. Can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring.
Features:
77M
77HP
77HP/6A
77HP/6AC
24" test leads (clips)
Constant/warble tone
Continuity testing
Polarity testing
Talk battery supply
Line 1 modular test lead (RJ-11)
3-color LED (identifies AC ring voltage)
Weather resistant design
Bent nose clips with "bed-of-nails" penetrator
Cloth test leads
Power Requirements
One 9V battery, nominal life, 50 hrs
Transmitter Frequency
900/1100Hz alternating, 900Hz constant nominal
Transmitter Power into 600 ohms
7 dBm
Voltage Protection at 600 ohms in CONT
52 VDC (77HP/6A 60 VDC) (all units provide higher voltage protection in OFF/TONE modes)
High-impact ABS Case
1.25 x 2.25 x 2.5, 24" test leads, 4.5 oz. w/battery
The TEMPO Communications 801K Tone and Probe Kit comprises the 77HP/6A High Power Tone Generator and the 200FP Inductive Amplifier in a rugged woven polyester carrying case. The 801K represents the top-of-the range in wire and cable identification. When first turned on the 200FP is in the normal tone probe mode, detecting and playing most voice frequency signals. With a short press of the control button the probe enters the filtered mode, eliminating the hum and buzz created by light fixtures and power lines.
This Eclipse Tools Pro'sKit All-in-one Toner & probe Kit lets you use Toner and Probe to validate and troubleshoot wiring on RJ11/RJ45 cables and connectors, USB, F, BNC, and RCA connectors, and it also supplied with alligator clips to work with. The 902-228 Toner detects telephone and Ethernet service, indicates polarity and active line numbers on voice circuits, and indicates active pair number on Ethernet circuits. The 902-228 Toner and Probe also provide standard functions such as visual and audible signal strength indication, analog toning/detection, and continuity testing. It is ideal for all maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling , etc.
Transmitter Specifications:
Tone frequency: 1kHzTone mode: ONE/TWO-note toneCompatible connectors: RJ-45/RJ-11/USB/F/BNC/ RCA/Alligator ClipsContinuity test: <300ΩTalk battery voltage: 6V into 600ΩFunction selection: 5-position rotary switchCable map indication: 8 LED indicatorsVoltage protection: 100VLow battery display: 6.5VBattery type: 9V (6F22), not includedDimension (LxWxD): 5.5 x 2.8 x 1.2 in.
Receiver Specifications:
This Klein Tools Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The ET310 Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester.
The Fluke Networks TS90 is our easy-to-use, three-tools-in-one tester - a fault locator, a cable inventorymanager and a toner with SmartTone technology (up to 2,500 feet). Easily find the distanceto opens or shorts on electrical wire, telephone wire, security wire and coax. Displays distancereading rather than waveform.
The Fluke Networks Intellitone Pro 200 Kit has breakthrough digital and analog toning finds cables other toners/probes can't. Advanced sensing modes accurately find the correct cable bundle, and then rapidly isolate the exactcable from within that bundle. Digital signal rejects noise and safely tones active networks.The SmartTone feature precisely locates individual wire pairs by changing tone when pair isshorted. Verifies end-to-end cable continuity and basic miswires. Identifies and troubleshootsservices with datacom link, two line telecom, continuity and polarity. Powerful talk batterycapability tests telecom circuits.
Tests and troubleshoots telephone, data and coax wiring. The Greenlee NC-500 NETcat® Pro2 is a digital tool for fast, accurate checking of cables, wiring and network service. Operated using a back-lit touch screen display, the NETcat® Pro2 tests wiring continuity and proper pair allocation, measures the length of cables, determines if network service is available and identifies Power over Ethernet (PoE) cables. When used with the NC-510 Accessory Kit, containing seven (7) expansion remote test modules, the NETcat® Pro2 can uniquely test coax or twisted pair jacks from a central location eight (8) at a time. Using a fingertip or the built-in stylus, the screen can be used to control and display a range of tests from fault finding to TDR length measurement. The display can be set to English, Spanish, French or German language.
Like our tone generators, Tempo's inductive amplifiers are recognized as industry standards by field service professionals. Used in conjunction with any of our tone generators, the units permit wire and cable identification without having to make direct metallic contact with the conductor. Powerful receiver gain permits accurate identification in even the most congested cable bundles and equipment rooms. Other features include a powerful, two-inch speaker, which eliminates the need for additional buttsets or headsets, a unique, blended, carbon compound tip that reduces conductivity - minimizing the risk of shorting terminals without sacrificing performance - and a recessed on/off push button control. A spare duckbill tip is included.
The 200B Inductive Amplifier can also be used with the nickel-plated brass probe tips.
Power
Probe tip resistance
Metal 0 ohms, plastic 300 ohms minimum
Input impedance
Gain
26 dB
Size
1.125 x 2.125 x 9", 5.5 oz w/batt
The 200FP Inductive Amplifier offers the same exceptional qualities as Model 200B, plus an adjustable volume control for more precise identifi-cation when tone signal "bleed" is affecting the identification process, and recessed tabs for buttset or headset connections. In addition, an added LED for visual signal strength indication.
300 ohms minimum
35 decibels
1.25 x 1.375 x 9.75", 4.7 oz w/batt
Like our tone generators, Tempo's inductive amplifiers are recognized as "Industry Standards" by field service professionals. Used in conjunction with any of our tone generators, our inductive amplifiers permit wire and cable identification without having to make direct metallic contact with the conductor. Powerful receiver gain permits accurate identification in even the most congested cable bundles and equipment rooms. Includes one each spare duckbill and metal tip.
The 200GX Inductive Amplifier offers the same exceptional qualities as Model 200EP, including an adjustable volume control for more precise identification when tone signal "bleed" is affecting the identification process, recessed tabs for buttset or headset connections and an LED display for visual signal strength indication - but now has a new, rugged, ergonomically-designed housing!
U.S. PAT. NO. 5,457,441; 5,574,769 and 5,577,099
