MM9-LC TechLogix Networx LC Fiber Optic Connector, ECO Series
TechLogix Networx MM9-LC LC Fiber Optic Connector, ECOConnector, Multimode OM2 OM3 OM4
TechLogix ECO Series™ field-installable fiber optic connectors are designed for quick, easy and reliable termination of 250μm, 900μm and 2.0mm fiber cables, including both distribution and zip-cord configurations.
ECO Series™ connectors are compatible with both single mode (OS1 & OS2) and multimode (OM1, OM2, OM3 & OM4) fiber and are available in standard (UPC) and angled (APC) pre-polished formats. No epoxying, crimping, polishing or proprietary tools are required for termination.
Unlike other connectors which are marketed as “one-size fits all”, ECO Series™ connectors are specific to 250μm, 900μm and 2.0mm cables to ensure perfect alignment, reducing refraction and signal loss. And regardless of cable, a large built-in verification window, self-centering alignment groove and easy-to-press button for one-click termination ensures installation times around two minutes.
- LC type connectors
- Pre-polished for UPC (standard) & APC (angled) connections
- Compatible with single mode (OS1 & OS2) & multimode (OM1, OM2, OM3 & OM4) cable
- Compatible with 250μm, 900μm & 2.0mm cable, including distribution and zip-cord formats
- No proprietary tools required
- No epoxy, crimping or polishing required
- Built-in verification window showing proper termination
- Self-centering alignment groove for easy & reliable insertion of the fiber optic strand
- Built-in button for one click termination & locking jig release
- Average termination time around two minutes
- Re-usable (five or less termination cycles recommended)
TechLogix Networx part number MM9-LC
95-050-99-X Corning UniCam Fiber Optic Connector, LC 50µm Multimode OM3 OM4
Corning 95-050-99-X UniCam Fiber Optic Connector, LC 50µm Multimode OM3 OM4
Corning UniCam LC connectors offer optical performance in a fast, easy field-termination solution ideal for fiber-to-the-workstation applications where setup and teardown time is critical. The high-precision mechanical splice technology enables fiber optic networks to be installed quickly and cost effectively. Installation of an LC, SC or ST compatible connector can be accomplished in about 50 seconds to one minute with the UniCam High-Performance Tool Kit.
Features and Benefits:
- Performance guaranteed - 100 percent yield guarantee
- Broad operating temperature range (-40°C to +75°C) - Utility and flexibility
- Factory-polished end face - Consistent optical performance
- Fast termination and no consumables
- Low installation cost
- Minimum insertion loss - Optimum optical performance
Corning part number 95-050-99-X
Online Price: $19.98 Quantity Discount Available
95-200-99 Corning UniCam Fiber Optic Connector, LC Single-mode OS2
Corning 95-200-99 UniCam Fiber Optic Connector, LC Single-mode OS2
Corning UniCam LC connectors offer optical performance in a fast, easy field-termination solution ideal for fiber-to-the-workstation applications where setup and teardown time is critical. The high-precision mechanical splice technology enables fiber optic networks to be installed quickly and cost effectively. Installation of an LC, SC or ST compatible connector can be accomplished in about 50 seconds to one minute with the UniCam High-Performance Tool Kit.
Features and Benefits:
- Performance guaranteed - 100 percent yield guarantee
- Broad operating temperature range (-40°C to +75°C) - Utility and flexibility
- Factory-polished end face - Consistent optical performance
- Fast termination and no consumables - Low installation cost
- Minimum insertion loss - Optimum optical performance
Corning part number 95-200-99
Online Price: $22.49 Quantity Discount Available
6830-62.5 3M No Polish LC Fiber Optic Connector
The 3M 6830-62.5 No Polish connectors help enable fast, on-site installation of 250 µm and 900 µm singlemode and multimode fiber.
This 3M No Polish connector utilizes a one piece, pre-assembled design that eliminates field polishing and loose parts. It is ideal for FTTP drop terminations as well as LAN structured cabling backbone, and fiber-to-the-enclosure applications. With a factory-polished ferrule assembly and a mechanical splice, the connector can be quickly installed - without electrical power - using a simple field tool that is included in every box of 60 connectors. For excellent mechanical performance, the NPC has internal gripping elements for the strain relief of the 900 µm buffer along with a unique, bell-shaped boot. The boot is attached to the connector body, minimizing the chance of losing or forgetting to install it during the termination process. After the installation, the boot helps keep the fiber from kinking, even during side pull. The SC/APC and LC/APC compatible connectors are available with a standard, flat splice configuration or with a keyed, angle splice. To maximize installation yield, the splice in the 6830-62.5 connector can be opened and reused with a cap lifter. The assembly tool and cap lifter are included in every box of 60 connectors.
3M Part Number 6830-62.5
