Paladin PA1646 Professional-Quality Crimp Tool for Open Barrel D-Sub Contact Pins

Professional-quality crimping tools for connectors and pins.
See crimp chart for specific connector and crimp dimensions.

• Precision-calibrated crimp profiles
• Finest-quality tool steel
• Ergonomically-shaped handles for comfort and performance
• Small grip distance
• Interchangeable die system for some crimpers, fixed die sets on others
• Some models have adjustable open barrel contact holders
• Lifetime warranty on frame; one-year warranty on dies

Paladin 1600 Series Info

Paladin PA901435 PZ6 ROTO Professional-Quality Crimp Tool for Insulated & Non-Insulated Ferrules (Rotatable crimp die)

Professional-quality rotary crimping tool for insulated and non-insulated wire ferrules with a wire range of AWG 24-10 (0.25-6.0 mm2).

• Rotating die for front or side ferrule insertion
• Crimps conform to EN 60947-1 & DIN 46228 Pt. 1 and 4
• Hardened steel die system for long life
• Single tool for entire wire range (no additional dies are required)
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
• Lifetime warranty

Paladin 1600 Series Info

Paladin PA1649 Professional-Quality Crimp Tool for Insulated & Non-Insulated Ferrules (DIN or US type wire ferrules)

Professional-quality crimping tools for connectors and pins.
See crimp chart for specific connector and crimp dimensions.

• Precision-calibrated crimp profiles
• Finest-quality tool steel
• Ergonomically-shaped handles for comfort and performance
• Small grip distance
• Interchangeable die system for some crimpers, fixed die sets on others
• Some models have adjustable open barrel contact holders
• Lifetime warranty on frame; one-year warranty on dies

Paladin 1600 Series Info

Paladin PA1648 PZ4 Professional-Quality Crimp Tool for Insulated & Non-Insulated Ferrules (DIN or US type wire ferrules)

Professional-quality crimping tools for connectors and pins.
See crimp chart for specific connector and crimp dimensions.

• Precision-calibrated crimp profiles
• Finest-quality tool steel
• Ergonomically-shaped handles for comfort and performance
• Small grip distance
• Interchangeable die system for some crimpers, fixed die sets on others
• Some models have adjustable open barrel contact holders
• Lifetime warranty on frame; one-year warranty on dies

Paladin 1600 Series Info

Paladin 900622 CTN25 D4 Professional-quality Terminal Crimper for non-insulated terminal lugs.

Professional-quality crimping tools for non-insulated terminal lugs with a wire range of AWG 8-4 (10-25 mm2). Fixed steel die system. Both models have durable steel construction for long life. Lifetime warranty.

900622:

• Crimps rolled and brazed lugs
• Crimps pin-type lugs
• Crimps parallel and serial splices
• Conforms to DIN 46234
• Lifetime warranty

900623:

• Crimps tube lugs and splices
• Conforms to DIN 46235
• Lifetime warranty

Paladin 900612 CTI6 Professional-quality Terminal Crimper for insulated terminal lugs.

Professional crimping tool for insulated terminal lugs with a wire range of AWG 20-10 (0.1-6.0 mm2).

• Fixed steel die system
• Built-in locator
• Crimps insulated terminal lugs, cable lugs and parallel and serial splices
• Durable steel construction for long life
• Long ergonomic handles for low-effort operation
• Color-coded crimp areas for size identification
• Lifetime warranty

Crimp profile
Red: AWG 20-16 (0.5-1.5 mm2)
Blue: AWG 16-14 (1.5-2.5 mm2)
Yellow: AWG 12-10 (4.0-6.0 mm2)

Paladin PA1647 Professional-Quality Crimp Tool for Insulated & Non-Insulated Ferrules (DIN or US type wire ferrules)

Professional-quality crimping tools for connectors and pins.

See crimp chart for specific connector and crimp dimensions.

• Precision-calibrated crimp profiles
• Finest-quality tool steel
• Ergonomically-shaped handles for comfort and performance
• Small grip distance
• Interchangeable die system for some crimpers, fixed die sets on others
• Some models have adjustable open barrel contact holders
• Lifetime warranty on frame; one-year warranty on dies

Paladin 1600 Series Info

Paladin 901461 HTN21L Professional-quality Terminal Crimper for non-insulated terminal lugs.

Professional-quality crimping tool for non-insulated terminal lugs with a wire range of AWG 20-10 (0.5-6.0 mm2).

• Fixed steel die system
• Crimps non-insulated terminal lugs, cable lugs, and parallel and serial splices
• Built-in terminal locator
• Durable steel construction for long life
• Ergonomically designed handles for low-effort operation
• Lifetime warranty

Crimp profile
Small: AWG 20-16 (0.5-1.5 mm2)
Medium: AWG 16-14 (1.5-2.5 mm2)
Large: AWG 12-10 (4.0-6.0 mm2)

Paladin PA1670 EDAC/ELCO Pin Crimp Tool w/ Locator Pin Guide

Description

Crimps loose 18-28 AWG EDAC (ELCO) rack and panel open barrel contacts: EDAC 516-290-590 & 516-290-591 pins & ELCO 000-60-8017-03-13 pins.

Features

Embedded pin locators properly align pins to ensure accurate, reliable crimping Factory-calibrated for precision Requires low hand force & provides superior crimp force True ergonomic design for extreme comfort & performance Non-slip, soft rubber handles Double-plated die sets for extended long life & crimping accuracy

Paladin PA1645 Professional-Quality Crimp Tool for Open Barrel Contact Pins

Professional-quality crimping tools for connectors and pins.
See crimp chart for specific connector and crimp dimensions.

• Precision-calibrated crimp profiles
• Finest-quality tool steel
• Ergonomically-shaped handles for comfort and performance
• Small grip distance
• Interchangeable die system for some crimpers, fixed die sets on others
• Some models have adjustable open barrel contact holders
• Lifetime warranty on frame; one-year warranty on dies

Paladin 1600 Series Info

Paladin PA4800 CrimpALL Crimp Pack for making your own kit by adding the die sets you need every day.

Make your own kit by adding the die sets you use every day! Ultra-smooth ratcheting CrimpALL crimp tool frame and room for five die sets in rugged black nylon pack with belt loop and wrist strap. Outside holster can hold crimp tool and more!

Contains:

• Paladin's CrimpALL crimp tool frame (P/N 8000)
• EZI-CHANGE die screws (P/N 2303)
• One-year warranty on kit; individual warranties apply to each tool

Dimensions: 4.5" W x 11" L x 2.5" D

PA8024 Paladin Non-Insulated Terminals And Lugs Solid Or Stranded Wire, 22-8 AWG

CrimpALL//8000 Series

The 8000 Series CrimpALL was designed with user satisfaction in mind. This world-class crimp tool is designed for superior confort and ease of use. It is an exceptional value and uses the same die sets as our 1300 Series crimpers

Features

Ultra-smooth, fully ratcheting crimp cycle with built-in safety release Interchangeable die sets of heat-treated steel for long life Soft, rubber-embedded handles Long lasting tool that delivers over 50,000 crimp cycles Rugged, double-plated jaw design to increase life span 10-year warranty

Advantages

Angled head to prevent awkward wrist bending during operation Reduced handle grip distance makes it easy for both small and large hands Higher crimp force produced with less hand force so hand doesn't tire as quickly No breakover hand-force -the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp- the CrimpALL does the work! Manufactured using the newest fine blanking technologies EZI-Change die screws make changing die quick and easy -no screwdriver required

Paladin 8000 Series Info

PA8029 CrimpALL Crimp Tool for Open Barrel D-Sub Contact Pins RS-232

CrimpALL//8000 Series

The 8000 Series CrimpALL was designed with user satisfaction in mind. This world-class crimp tool is designed for superior confort and ease of use. It is an exceptional value and uses the same die sets as our 1300 Series crimpers

Features

Ultra-smooth, fully ratcheting crimp cycle with built-in safety release Interchangeable die sets of heat-treated steel for long life Soft, rubber-embedded handles Long lasting tool that delivers over 50,000 crimp cycles Rugged, double-plated jaw design to increase life span 10-year warranty

Advantages

Angled head to prevent awkward wrist bending during operation Reduced handle grip distance makes it easy for both small and large hands Higher crimp force produced with less hand force so hand doesn't tire as quickly No breakover hand-force -the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp- the CrimpALL does the work! Manufactured using the newest fine blanking technologies EZI-Change die screws make changing die quick and easy -no screwdriver required

Paladin 8000 Series Info

PA8027 CrimpALL Crimp Tool for Open Barrel Non-Insulated Terminals, Wide Lugs And Power Contacts

CrimpALL//8000 Series

The 8000 Series CrimpALL was designed with user satisfaction in mind. This world-class crimp tool is designed for superior confort and ease of use. It is an exceptional value and uses the same die sets as our 1300 Series crimpers

Features

Ultra-smooth, fully ratcheting crimp cycle with built-in safety release Interchangeable die sets of heat-treated steel for long life Soft, rubber-embedded handles Long lasting tool that delivers over 50,000 crimp cycles Rugged, double-plated jaw design to increase life span 10-year warranty

Advantages

Angled head to prevent awkward wrist bending during operation Reduced handle grip distance makes it easy for both small and large hands Higher crimp force produced with less hand force so hand doesn't tire as quickly No breakover hand-force -the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp- the CrimpALL does the work! Manufactured using the newest fine blanking technologies EZI-Change die screws make changing die quick and easy -no screwdriver required

Paladin 8000 Series Info

PA8022 - Paladin CrimpALL Crimp Tool for Insulated Terminals And Lugs Solid Or Stranded Wire, 22-12 AWG

CrimpALL//8000 Series

The 8000 Series CrimpALL was designed with user satisfaction in mind. This world-class crimp tool is designed for superior confort and ease of use. It is an exceptional value and uses the same die sets as our 1300 Series crimpers

Features

Ultra-smooth, fully ratcheting crimp cycle with built-in safety release Interchangeable die sets of heat-treated steel for long life Soft, rubber-embedded handles Long lasting tool that delivers over 50,000 crimp cycles Rugged, double-plated jaw design to increase life span 10-year warranty

Advantages

Angled head to prevent awkward wrist bending during operation Reduced handle grip distance makes it easy for both small and large hands Higher crimp force produced with less hand force so hand doesn't tire as quickly No breakover hand-force -the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp- the CrimpALL does the work! Manufactured using the newest fine blanking technologies EZI-Change die screws make changing die quick and easy -no screwdriver required

Paladin 8000 Series Info

PA8021 - CrimpALL Crimp Tool for Insulated Terminals And Lugs

CrimpALL//8000 Series

The 8000 Series CrimpALL was designed with user satisfaction in mind. This world-class crimp tool is designed for superior confort and ease of use. It is an exceptional value and uses the same die sets as our 1300 Series crimpers

Features

Ultra-smooth, fully ratcheting crimp cycle with built-in safety release Interchangeable die sets of heat-treated steel for long life Soft, rubber-embedded handles Long lasting tool that delivers over 50,000 crimp cycles Rugged, double-plated jaw design to increase life span 10-year warranty

Advantages

Angled head to prevent awkward wrist bending during operation Reduced handle grip distance makes it easy for both small and large hands Higher crimp force produced with less hand force so hand doesn't tire as quickly No breakover hand-force -the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp- the CrimpALL does the work! Manufactured using the newest fine blanking technologies EZI-Change die screws make changing die quick and easy -no screwdriver required

Paladin 8000 Series Info

Greenlee PA1600 Series Crimp Tool Frame

The Greenlee PA1600 Crimp Tool Frame ONLY

• Precision-calibrated crimp profiles
• Finest-quality tool steel
• Long-lasting tool that delivers over 75,000 crimp cycles
• Ultra-smooth, advanced ratcheting system with built-in safety release
• Rugged, double-plated jaw design for increased life span
• Smallest grip hand tool on the market with the longest life span available
• Lowest hand-force of the long-life crimp tools on the market without compromising superior crimp force
• True ergonomic rubber handles that are soft and won't quickly wear out or break
• No breakover hand force - the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp - the tool does the work
• Interchangeable die sets
• Fiber optic die sets manufactured using secondary precision 3-D CNC grinding process to ensure +/- .002 tolerances for crimping profiles

Paladin PA1360 Crimp Tool for Insulated and Non-Insulated Wire Ferrules

The 1300 series, interchangeable-die crimp tool is the answer for precision crimping at an affordable price. These tools crimp the most popular connectors. See crimp chart for specific connector and crimp dimensions.

• Long lasting tool
  


• Easy to use and maintain
  


• Fully-ratcheting cycle with built-in safety release
  


• Interchangeable dies constructed of heat-treated steel for long life
  


• EZI-Change die screws make changing dies quick and easy
  


• Ergonomically-designed handles for effortless operation
  


• Foam-lined case available for keeping dies and crimper frame together (P/N 901013)
  


• Choose from complete tool with die set inserted or separate tool frame and individual die sets
  


• Five-year warranty on frame; one-year warranty on dies
  

Length:  8.9"  (225 mm)

Paladin 1300 Series Info

Paladin PA1359 Crimp Tool for Open Barrel D-Sub Contact Pins

The 1300 series, interchangeable-die crimp tool is the answer for precision crimping at an affordable price. These tools crimp the most popular connectors. See crimp chart for specific connector and crimp dimensions.

• Long lasting tool
• Easy to use and maintain
• Fully-ratcheting cycle with built-in safety release
• Interchangeable dies constructed of heat-treated steel for long life
• EZI-Change die screws make changing dies quick and easy
• Ergonomically-designed handles for effortless operation
• Foam-lined case available for keeping dies and crimper frame together (P/N 901013)
• Choose from complete tool with die set inserted or separate tool frame and individual die sets
• Five-year warranty on frame; one-year warranty on dies

Length: 8.9" (225 mm)

Paladin 1300 Series Info

Paladin PA1334 Crimp Tool for Insulated Terminals & Lugs

The 1300 series, interchangeable-die crimp tool is the answer for precision crimping at an affordable price. These tools crimp the most popular connectors. See crimp chart for specific connector and crimp dimensions.

• Long lasting tool
• Easy to use and maintain
• Fully-ratcheting cycle with built-in safety release
• Interchangeable dies constructed of heat-treated steel for long life
• EZI-Change die screws make changing dies quick and easy
• Ergonomically-designed handles for effortless operation
• Foam-lined case available for keeping dies and crimper frame together (P/N 901013)
• Choose from complete tool with die set inserted or separate tool frame and individual die sets
• Five-year warranty on frame; one-year warranty on dies

Length: 8.9" (225 mm)

Paladin 1300 Series Info