Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2� machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  


• Lap joint construction provides protection against access of dust and splashing water. The Hammond 1590G provides for improved EMI/RFI shielding.
  


• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  


• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  


• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  


• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  


• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.