Eclipse Tools 900-162B Die Cast Box - 4.8" X 2.6" X 1.4"

This heavy duty enclosure is made of high quality die cast aluminum. Channeled walls for convenient PCB mounting. Also acts as an excellent heat sink.

Eclipse Tools 900-162C Die Cast Box - 7.6" X 4.4" X 2.2"

This heavy duty enclosure is made of high quality die cast aluminum. Channeled walls for convenient PCB mounting. Also acts as an excellent heat sink.

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2� machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  


• Lap joint construction provides protection against access of dust and splashing water. The Hammond 1590G provides for improved EMI/RFI shielding.
  


• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  


• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  


• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  


• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  


• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.