Pro'sKit MT-1510 Multimeter by Eclipse Tools

Compact Size, True RMS, Auto-Range, DMM

902-186N Eclipse Tools VFL Tester

Eclipse Tools 902-186N VFL Tester

• Laser output is class 3A (around 3~5 milliwatt)
• Maximum opereration distance is 8 km
• Simple, versatile, and user-friendly design
• Rugged, compact, and splash proof copper housing
• Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes
• Continuous wave output mode (CW) for steady fault illumination
• Pulse mode helps to locate faults under high ambient light conditions
• Support 2.5mm connectors (for PC/FC/SC/ST)
• The button switch permits easy one handed operation
• Handy, pocket pen design
• 2 AAA-size alkaline batteries provide 50 hours of continuous operation

900-244 Eclipse Tools Banjo Adaptor 4-6-8 pin

Eclipse Tools 900-244 Banjo Adaptor 4-6-8 pin

In-line Modular Adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a modular cord terminated with 4-pair "universal" plug for accessing any standard 6- or 8-position jack.

Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the body.

Pro'sKit MT-1210 Digital Multimeter by Eclipse Tools

3-1/2 Digits 1999 Counts, Continuity, Diode, Transistor, Battery Tests, DMM

MT-7509 Eclipse Tools Visual Fault Locator for LC Connectors

Eclipse Tools MT-7509 Visual Fault Locator for LC Connectors

• This Eclipse Tools Laser output is class 3A (around 3~5 milliwatt)


• Maximum opereration distance is 8 km


• The MT-7509 is Simple, versatile, and user-friendly design


• Rugged, compact, and splash proof copper housing


• Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes


• Continuous wave output mode (CW) for steady fault illumination


• Pulse mode helps to locate faults under high ambient light conditions


• Support LC 1.25mm connectors


• The button switch permits easy one handed operation


• Handy, pocket pen design


• 2 AAA-size alkaline batteries provide 50 hours of continuous operation

400-001 Eclipse Tools Multi-Network Ethernet Cable Tester

Eclipse Tools 400-001 Multi-Network Ethernet Cable Tester

This Multi-Network ethernet cable tester is designed to quickly test matched pair cables by auto-scanning the wires for continuity (shorts/opens) and mis-wiring. It tests Ethernet coax cables using a remote terminator (included) as well as 10 Base-T UTP/STP cables.

• Tests both shielded and unshielded cables
• Includes two-piece tester with coax remote terminator
• Black zipper pouch for storage

400-011 Eclipse Tools Tone Generator & Probe Kit

Eclipse Tools 400-011 Tone Generator &  Probe Kit

• Fast, accurate wire identification
• Rugged industrial design
• Sends tone to identify wires
• Three selectable tone outputs
• Two-line polarity indication
• Continuity test
• Adjustable volume controlVisual signal strength indicationPowerful speaker for noisy environments
• Recessed telephone test set connectors

Tone Generator
Tone frequency: 1kHz
Max. testing distance: 1.5km
Max. working current: ≤20mA
Tone mode: One / Two-note tone
Compatible connectors: De-energized AC wire, telephone/twisted pair wire, all voice
Function selection: TONE/OFF/CONT
Continuity test: 1 LED (≤10Ω), Coaxial cable & solid/ stranded wire by alligator clips patch cord
Max. signal voltage: 8Vp-p
LED indicator: Power indicator x1, Phone line poliarity indicator x1, Phone line status indicator x1
Live telecommunication equipment test and router test: Y
Voltage protection: DC 48V
Low battery indication: 7V(Flashing power indication)
Battery type: DC9.0V � 1pc, not included
Dimension(L x W x H): 2.6 x 2.3 x 1.3 in.
Weight 0.14 lbs
Amplifier Probe
Frequency: 1kHz
Max. working current: ≤70mA
Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
Earphone socket: 1
Signal status indication: LED & Buzzer
NCV  indication: LED (AC 90~1000V)
LED illumination: Y
Power indication: LED x 1
Battery type: DC9.0V � 1pc, not included
Dimension(L x W x H): 9.0 x 2.2 x 1.0 in.
Weight: 0.18 lbs
Accessory: Storage bag

400-026 Eclipse Tools 8 LED Multi-Modular Cable Tester

Eclipse Tools 400-026 8 LED Multi-Modular Cable Tester

• Tests RJ45, 10 Base-T, Token Ring, RJ11/12 and Coax
• Checks continuity, shorted/open and crossed wire pairs
• Coaxial tests for short or open shield and conductor breaks
• LED's on both units allow for one person testing
• 9V battery not included

400-029 Eclipse Tools Receptacle Tester - Standard Outlets

Eclipse Tools 400-029 Receptacle Tester - Standard Outlets

The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This 400-029 model is a UL approved and RoHS compliant tester.

Correct Wiring

Open Ground? Reverse Polarity

Open Hot- Open Neutral

Hot on Neutral

Hot and Ground Reversed with Open Hot

Works on 120VAC circuits

Light pattern indicates status

UL approved

RoHS compliant

400-030 Eclipse Tools Receptacle Tester - GFCI Outlets

Eclipse Tools 400-030 Receptacle Tester - GFCI Outlets

Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3 Wire, 120Volt AC.

Eclipse Tools GFCI Receptacle Tester detects faulty wiring in 3 Wire receptacles, 6 possible fault conditions displayed by light pattern. It tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot and ground fault interruption in 3 Wire, 120Volt AC circuits. The 400-030 GFCI receptacle tester meets UL and RoHS standards.

• For GFCI Outlets
• Finds faulty wiring in 3 Wire receptacles
• 6 possible fault conditions
• displayed by light pattern
• Voltage rated at 120Volts

400-042 Eclipse Tools Butt Set

Eclipse Tools 400-042 Butt Set

Recognized as the new industry standard, the 400-042 by Eclipse Tools butt set provides superior quality at an affordable price. With its high impedance monitor for data safe operation, technicians can clip onto a line in Monitor mode without disrupting existing traffic. Prokit's unsurpassed protection standards and durability assure the butt set will keep working even in the toughest environments. New weatherproofing provides enhanced resistance to severe weather conditions.

• Built-in amplified speaker with three audio levelsM
• Tone and pulse modes
• Store up to twelve, 16-digit telephone numbers in speed dial
• Pre-dialing and last number redial
• Advanced PBX pause function
• High-impedance monitor mode
• Equipped with the mute switch
• Continuous polarity LED indications
• Power saving auto-shut off after 5 min of inactivity
• Battery: 9 Volt (not included)

5MT-8006-CROC Eclipse Tools Test Leads for MT-8006B Data Diver

Eclipse Tools 5MT-8006-CROC Test Leads for MT-8006B Data Diver

-

5MT-8006B-H Eclipse Tools Case for MT-8006B

Eclipse Tools 5MT-8006B-H Case for MT-8006B

-

8PK-ST1520 Eclipse Tools Digital Earth Resistance Tester

Eclipse Tools 8PK-ST1520 Digital Earth Resistance Tester

• Capable of measuring earth voltage (Vac.)
• 2mA measuring current permits earth resistance to test without tripping earth leakage current breakers in the circuit
• Battery operated
• Auto power off function
• Data hold function
• Small and light weight

Measurement ranges: Earth resistance 0-20Ω/0-200Ω/0-2000Ω, Earth voltage 0-200V AC (40-500Hz)
Accuracy: Earth Resistance ±(2% rdg+2dgt), Earth Voltage ±(1% rdg+2dgt)
Earth resistance resolution: 0-20Ω(0.01Ω), 0-200Ω(0.1Ω), 0-2000Ω(1Ω)
Measurement system: Earth resistance by constant current inverter 820Hz APPROX. 2mA.
Low battery indication: "B" symbol appears on the display
Data hold indication: "DH" symbol appears on the display
Over range indication: "1" (MSD)
Open circuit indication: LED will be unlit
Display LCD: 3-1/2 digit (2000 counts)
Power source: 1.5V(SUM-3) x 6. Type AA.
Dimensions (in): 6.4(L) x 3.9(W) x 2.0(D)
Weight: 1.1 lbs approx.(battery included)
Accessories: Test leads (red 15m yellow-10mgreen-5m), Auxiliary earth bars. Heavy-duty case, Instruction manual.

902-228 Eclipse Tools All-in-One Toner & Probe Kit

Eclipse Tools 902-228 All-in-One Toner & Probe Kit

This Eclipse Tools Pro'sKit All-in-one Toner & probe Kit lets you use Toner and Probe to validate and troubleshoot wiring on RJ11/RJ45 cables and connectors, USB, F, BNC, and RCA connectors, and it also supplied with alligator clips to work with. The 902-228 Toner detects telephone and Ethernet service, indicates polarity and active line numbers on voice circuits, and indicates active pair number on Ethernet circuits. The 902-228 Toner and Probe also provide standard functions such as visual and audible signal strength indication, analog toning/detection, and continuity testing. It is ideal for all maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling , etc.

Transmitter Specifications:

Tone frequency: 1kHz
Tone mode: ONE/TWO-note tone
Compatible connectors: RJ-45/RJ-11/USB/F/BNC/ RCA/Alligator Clips
Continuity test: <300Ω
Talk battery voltage: 6V into 600Ω
Function selection: 5-position rotary switch
Cable map indication: 8 LED indicators
Voltage protection: 100V
Low battery display: 6.5V
Battery type: 9V (6F22), not included
Dimension (LxWxD): 5.5 x 2.8 x 1.2 in.

Receiver Specifications:

Frequency: 1kHz
Compatible connectors: RJ-45/RJ-11/USB/F/BNC/RCA
Ear jack: 1
Signal status indication: 8 LED indicators
Cable map indication: 8 LED indicators
Low battery display: 6.5V
Battery type: 9V (6F22), not included
Dimension (LxWxD): 9.8 x 2.0 x 1.3 in.

902-267 Eclipse Tools Replacement leads for 400-042 Butt-Set

Eclipse Tools 902-267 Replacement leads for 400-042 Butt-Set

-

902-459 Eclipse Tools Test Leads for MT-8006B

Eclipse Tools 902-459 Test Leads for MT-8006B

Professional grade "Bed of Nails" insulation piercing clips within the jaws
• Ultra-durable nylon braided jacket
• Guarentee ruggedness and flexibility
• Non-Insulated ring terminals
• 50 inch
• The 902-459 fits the MT-8006B

902-558 Eclipse Tools Hand-Held TDR

Eclipse Tools 902-558 Hand-Held TDR

• Quickly and accurately measures cable length
• checks for breaks
• Ideal for measuring total cable left on spool!

Range: 3km (9,842 ft.) max., 5 m (16.5 ft.) min.
Accuracy: ±1.0% of reading
Resolution: 1 cm (.40 in.)
V.O.P. (Velocity of propagation): 1.0% - 99.9% (In 0.1% step)
Auto V.O.P. set: Supported
User settable V.O.P.: 8 memories
Auto power off: Supported
Display: 128 x 64 Pixel LCD
Power supply: 2 AA Batteries (not included)
Operation time: 30,000 times with backlight
Safety (EMC): EN 55011:2009/A1:2012/EN 61326-1:2013/EN 61326-2-2:2013
Dimensions: 2.5" x 5.5" x 1.2"
Accessories: Soft carrying case and test lead

Product No Longer Available

Pro'sKit MT-1217 Digital Multimeter by Eclipse Tools

3-3/4 Digits 3999 Counts, Auto Range, Resistance, Frequency, Capacitance, Transistor Tests

Pro'sKit MT-1232 Digital Multimeter by Eclipse Tools

3-3/4 Digits 3999 Counts, Auto Range, Compact, Resistance, Frequency, Capacitance, Temperature Tests