Submit search
Calrad 40-2000 HDMI Extender up to 150ft. over a single UTP Cable.
Calrad 40-2000-IR HDMI & IR Extender up to 150-ft over single UTP Cable.
Calrad's fiber solution provides long distance full spec., HDMI 4K uncompressed signal transmission for pristine video signal delivery. 55-690 Series Single Mode Fiber, available in lengths of 50 ft., 100 ft., 150 ft., 200 ft., 300 ft.. Use Calrad's 72-209 Fiber Optic LC Female to LC Female Coupler to make different lengths of fiber cables.
Package Contents: 1 x 40-2020 Transmitter, 1 x 40-2020 Receiver, 2 x DC Power Supplies, 1 x IR Receiver, 1 x IR Emitter
The Calrad 2 Wire technology system provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. With the 40-204 many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter.
The Calrad 40-204R is used with the 2 Wire technology system that provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. Many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single 40-204 transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter. Check out our new MagWire miniature 2 conductor 45 gauge cable that is available in various lengths and provides unique problem solving solutions for running this cable.
Calrad 40-206 | 1080P (2 Wire 4 Port Signal Splitter): This splitter uses small terminal block connectivity to distribute 2 Wire signals, provides a simple method of connecting a single 40-204 2 Wire transmitter to four 40-204 2 Wire Receivers for signal distribution. In specific configurations and shorter distances, up to six 40-204 Receivers may be connected to the 40-206 Splitter. Ports 1-4 are for standard connectivity, ports 5-6 expansion ports are available for specific configurations, please consult Calrads tech support for further details. Easily mounts with double stick adhesive tape, (Included) or easily attached to wiring harnesses or rack hardware by using cable ties.
The Calrad 40-300 series HDMI over IP provides 1080P HD video signals over UTP network cabling. Many configurations are possible, 1.) Between a single transmitter and receiver directly without a network switch. 2.) Use multiple transmitters and receivers over an existing or separate network to create a small to large scaleable video distribution system. Up to 56 channels are possible. Using standard network switches can be used with existing networks and internet, if more than 3 transmitters are used on a 100Mb system, it is advisable to use specific 1Gb IGMP network switches to manage the signal bandwidth properly for new or existing installations. Transmitter ID addresses are easily selectable using the front panel 6 position dip switch. Receiver channel addresses are accessible by using a 12 button credit card size remote control only, to change channel addresses. Use the up down keys or direct channel address keys 0-9 to change to the desired channel. Two interface adapter cables are included for 3rd party home automation control. A full duplex bi-directional RS232 port is available for easy serial communication between devices. Easily create a virtual matrix switcher over IP with unlimited possibilities. A HDMI signal loop-output on the Transmitter is provided for continuous signal transmission to other devices.
This Calrad 40-YE0ID HDTV Balun system is designed to transmit Component video (Y,Pb,Pr), selectable switch for digital audio or IR signals over a single Cat5E/6 cable up to 1000 ft for a 640 x 480 resolution. Supports 480I/P, 720P and 1080I. Video bandwidth DC to 60MHz. Two units required, Bi-directional signal system. Passive design with no power required. 4 x RCA Jacks, 1 x removable 2 pin terminal block. Color: black. Size: 3.5” (L) x 2.2” (W) x 1” (H).
The Calrad 40-2015 balun provides a single UTP category 5e/6 cable solution to deliver pristine digital signals from all HDTV formats and signal sources from 480i/p to1080i/p, 4K x 2K \ 60hz. Provides IR and EDID support to the receiver for a single cable solution.
Package Contents: 1 x 40-2015 Transmitter, 1 x 40-2015 Receiver, 1 x DC Power Supply, 1 x IR Receiver, 1 x IR Emitter
This Manhattan HDMI over Ethernet Extender Kit extends an HDMI Signal up to 60 m (196 ft.) at 1080p@60Hz with a Single Cat6 Ethernet Cable.
Extends an HDMI signal over a single CAT5e or Cat6 cable. HDCP and HDMI 3D compliant. HDMI mode, LPCM 7.1, True HD, DTS-HS or stereo audio modes. Sold as a transmitter and receiver set. 5Vdc power supplies included. Note: Only Cat 6 Cable Delivers 3D! Specifications: Video Resolution 480P, 720P, 1080P Distance: 100 Meters HDMI In\Out Connectors DC Power Supply: 5Vdc, 2A Receiver-Transmitter Size: Length 5.125" x Width 3.5" x Height 1.25"
Calrad 40-1097 Wireless 1080p HDMI System This Wireless HDMI system delivers a plug-and-play method of extending HD audio/video wirelessly up to 30 meters in distance, with a perfect replication of high definition video and full digital and analog audio support for connecting HDTV sources. Featuring a performance unimpeded by line-of-sight operations, source signals are capable of transmitting through walls to accommodate multiple room installations. Wireless transmission speeds are achieved up to 300 Mbps, supporting even the most stringent demands of HD video. Built-in IR repeater system with IR receiver, IR emitter included.Specifications: * Supports up to1080P/25Hz non-compressing image and Compressed 5.1 Channel Digital Audio. * Transmission speed: 300Mbps. * Frequency: 5.18~5.32, 5.50~5.70 and 5.745~5.825GHz(ISM 5 GHz). * IR Carrier Frequency(blaster) 36k-40kHz. * Wireless: Antenna 2x3 MIMO. * Connector: HDMI 19-pin type A female. * Operating temperature: 0~50° C ambient temperature. * Storage temperature: -20~60° C. * Operation Humidity: 15%~80%(Non-condensing). * Storage Humidity: 15%~70%(Non-condensing). * Size, Transmitter, Receiver: 6.5” W x .75” H x 6” D. * Power supply: 5VDC 2A output. * IR Emitter with 5 FT. cable. * IR Receiver, with 5 FT. cable.
Calrad 40-1090-3D Specifications:HDTV Resolutions: 480P, 720P, 1080I, 1080P (1.65 Gbps, HDMI 1.3b)Input TMDS Signal: 5Vpp, Input DDC 5VppVertical Frequency Range: 50/60HzHDMI In\Out Connectors: 19 pin Female Jack, 1 Jack each unitRJ45 Shielded Connectors: 1 Jack, each unit, 2 x L.E.D power indicatorsDC Power Supply: 2 x 5V, 2A, Switchmode Regulated, 110-220VacHousing: Metal, Weight: 300g ea.Dimensions: L-3.9" x W-2.77" x H-1.1"
Calrad 40-1090-3D-IR Specifications:• HDTV Resolutions: 480p, 720p, 1080i, 1080p (Max 10.2Gbps, HDMI HIGH SPEED)• HDCP Compliant• Input TMDS Signal: 5Vpp, Input DDC 5Vpp• Vertical Frequency Range: 50/60Hz• HDMI ln/ Out Connectors: 19 pin Female Jack, 1 x RJ45 Shielded Jack each unit.• Included: 1 x IR Flashing Emitter (92-152) 1 x IR Receiver (92-165)• DC Power Supply: 2 x 5V, 2A, Switchmode Regulated, 110-220Vac• Housing: Metal, Black Color• Dimensions: Transmitter/ Receiver: 3.90" L x 2.77" W x 1.10" H• Weight: 300g each
Calrad 40-1091 HDMI Balun Over Single Cat5e Adapter Converter
This Calrad HDMI Balun is a small and innovative HDMI Converter Adapter Balun over One UTP category 5e / 6 cable with HDBaseT classification technology for an extend solution over 70m/230ft; use for small projects that may not need the full feature set of HDBaseT yet still benefit from the signal stability and functions offered by the powerful technology. This 40-1091 adapter is a perfect solution for replacing costly standard HDMI cables that are difficult to route thru wall and cabinets. One Cat5e, Cat6 wire using RJ45 terminations deliver digital signals & IR from the transmitter to the receiver. A small class 2 power from the HDMI source is not sufficient.
Calrad Part Number 40-1091
Calrad 40-2010 HDMI 4K Extender
The 40-2010 HDBaseT v1.0 balun provides a single UTP category 5e/6 cable solution to deliver pristine digital signals from all HDTV formats and signal sources from 480i/p to1080i/p, 4K x 2K \ 60hz. Provides bi-directional IR and RS232 support with POC to the receiver for a single cable solution. Option 1, 3rd party IR interface control and connectivity. Option 2, stand alone IR receiver and emitter solution. Send IR control signals from any 3rd party automation systems bi-directionaly using Calrad's optional 40-IRC3 interface cable see Option 1 IR connectivity below. L.E.D. indicators provide reference for Power, HDMI signal status, HDBaseT UTP cable signal reference.
The 40-2011 HDBaseT v1.0 balun provides a single UTP category 5e/6 cable solution to deliver pristine digital signals from all HDTV formats and signal sources from 480i/p to1080i/p, 4K x 2K \ 60hz. Provides bi-directional IR and RS232 support with POC to the receiver for a single cable solution. Option 1, 3rd party IR interface control and connectivity. Option 2, stand alone IR receiver and emitter solution. Send IR control signals from any 3rd party automation systems bi-directionaly using Calrad’s optional 40-IRC3 interface cable see reference (A) IR connectivity below. L.E.D. indicators provide reference for Power, HDMI signal status, HDBaseT UTP cable signal reference.
