Pro3000 Fluke Tone Generator and Probe Kit
The Fluke Pro3000 Toner and Probe kit is the innovative analog toner and probe from Fluke Networks.
It's your best choice for toning and tracing bare wire on non-active networks. Easily identify
individual pairs with its patented SmartTone technology (the five different tones for exact pair
identification). Angled-bed-of-nails clips allow easy access to individual wires, and the RJ-11
connector is ideal for use on telephone jacks. The large powerful speaker on the probe
allows you to hear through drywall, wood or other enclosures to find wires quickly and easily.
You can send tone up to 10 miles on most cables. Attach the nylon pouch to your belt, and
you will be equipped for any wire identification job.
- Select solid or alternating tone options, indicated with solid or flashing LEDs
- Exclusive SmartTone technology generates five separate analog tones when the pair is
shorted at the far end
- Works on de-energized AC wire, telephone/twisted pair wire, all voice and data category
rated cable, all coax cable, speaker wire and security wire
Fluke Part Number 26000900
Online Price: $109.50 SHIPS FOR FREE!
117 Fluke Electrician's Digital Multimeter with Non-Contact voltage
Fluke 117 Electrician's Digital Multimeter with Non-Contact voltage
Designed by Electricians. Engineered by Fluke � An Investment in Accuracy
With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease.
Engineered and Tested with Your Safety on the Job in Mind
We test our 117 Multimeters for safe use in CAT III 600 V environments. This is the ideal meter for your electrical work because:
- The large white LED backlight helps you work in poorly lit areas
- VoltAlertTM technology gives you fact, go/no go non-contact voltage detection
- AutoVolt and Low Input Impedance modes provide faster, more accurate readings
Product No Longer Available
80PK-1 Bead Probe Type-K Thermocouple
The Fluke 80PK-1 Bead Probe Type-K Thermocouple is for general purpose applications
Measurement range: -40 to 260°C
One year warranty
Product No Longer Available
C10 Fluke Meter Holster for 10 Series Meters
- Snap-on yellow holster absorbs shocks and protects meter from rough handling
- Includes built-in stand and hanger loop
- One year warranty
Fits Fluke:
10/11/12/12B
114/115/116/117
705/707
712/713
Product No Longer Available
C12A Fluke Soft Carrying Case
The Fluke C12A Case is a vinyl, zippered case, 6.8" x 5" x 1.5" with inside pockets and belt loop for convenient carrying.
Compatible Fluke Meters:
Fluke 114 Electrical Multimeter
Fluke 115 Multimeter
Fluke 116 HVAC Multimeter
Fluke 117 Multimeter for Electricians
Fluke 709 / 709H Loop Calibrator
Product No Longer Available
Fluke C50 Carrying Case for Fluke Multimeters
The Fluke C50 is a soft meter case which features an outer zipper, as well as an inside pocket belt loop and insider meter strap.
The Fluke C50 is compatible with the Fluke 113 Multimeter and Fluke 115 Multimeter.
Product No Longer Available
C90 Fluke Soft Case for DMMs and Visual IR thermometers
Fluke C90 Soft Case for DMMs and Visual IR thermometers
Compatible products to Fluke C90 Case:
Digital multimeters:
Fluke 110 True-rms Digital Multimeter
Fluke 179 IMSK Industrial Multimeter Service Kit
Fluke 114 Electrical Multimeter
Fluke 115 Field Technicians Digital Multimeter
Fluke 116 Digital HVAC Multimeter
Fluke 117 Electrician's Multimeter with Non-Contact Voltage
Fluke 175 True-RMS Digital Multimeter
Fluke 177 True-RMS Digital Multimeter
Fluke 179 True-RMS Digital Multimeter
IR thermometers:
63 Mini Infrared Thermometer Gun
Fluke 66 Handheld Infrared Thermometer
68IS Intrinsically Safe IR Thermometer
Pressure calibrators:
Fluke 712 RTD Process Calibrator
Fluke 717 Pressure Calibrator
Visual IR thermometers:
Fluke VT04A visual IR thermometer
Fluke VT04 visual IR thermometer electrical combo kit
Fluke VT04 visual IR thermometer HVAC combo kit
Fluke VT04 visual IR thermometer maintenance combo kit
Product No Longer Available
Fluke 175 True RMS Digital Multimeter
The Fluke 175 True RMS Digital Multimeter is the baseline for professional technicians around the world. With features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 175 CAT IV 600V/CAT III 1000 V digital multimeter provides accurate, True RMS readings through years of reliable service.
Need More Accuracy or Temperature Measurements?
If you need a higher degree of accuracy or contact temperature measurements click here to see Fluke 177 and Fluke 179 True RMS Digital Multimeters.
Product No Longer Available
Fluke 177 True RMS Digital Multimeter
With its precision, reliability and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.
The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.
Product No Longer Available
Fluke 77 IV Digital Multimeter
The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke's original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.
It measures:
- Wide 1000 V measurement range
- Average responding AC measurements
- 0.3% accuracy
- 10 Amps continuous (20 A for 30 seconds)
- Frequency and capacitance
- Resistance and continuity
Product No Longer Available
I410 Fluke 400A AC DC Current Clamp
AC/DC Current clamps for DMM's
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered Hall-effect probe measures 1A to 400 A
- 1mV/Amp output guarantees easy reading on your meter
- Take accurate current readings without breaking the circuit
- Maximum conductor 32 mm
- CAT III 600 V safety rating
- Also available with softcase for DMM and clamp (i410 kit)
Product No Longer Available
TL220 Fluke SureGrip Industrial Test Lead Set
Fluke TL220 SureGrip Industrial Test Lead Set
Fluke Test Lead Set includes:
- AC220 SureGrip� Alligator Clip Set
- TP238 SureGrip� Insulated Test Probe Set
- TL222 SureGrip� Silicone Test Lead Set (right to right)
- One year warranty
Product No Longer Available
TL26A Fluke Test Lead Set 60 in. 5-Way
The Fluke TL26A Test Lead Set has 5 ways to connect:
- U-shaped nose for blade-shaped terminals
- Notched jaw for gripping screw heads, bare wire or terminals
- Serrated teeth for gripping threaded or wire-wrapped terminals
- Cluster of sharp needles for piercing small gauge (#22-#28 AWG) wires
- Large piercing needle for penetrating larger gauge wires
Product No Longer Available
Fluke TL75 Test Lead Set Hard Point
- The Fluke TL75 Test Lead Set has One pair (red, black) of comfort grip probes
- 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
- Recommended for general purpose measurements
- CAT II 1000 V, , 10 A rating
- CAT IV 600 V, CAT III 1000 V only with protective cap
- CSA listed
- One year warranty
Product No Longer Available
TPAK Fluke ToolPak Magnetic Meter Hanger - The meter hanging solution
The Fluke TPAK meter hanging solution
- Kit includes, universal hanger clips (2), hook & loop straps (2 lengths) and strong magnet
- Combine components to meet most hanging needs
- Attaches to back of a 110/170/180 Series meter, 20/70 -III with integrated holster (with adapter), 724/725 and 50 Series II
- One year warranty
Product No Longer Available
PM55A Amprobe Compact Precision Digital Multimeter
The Amprobe PM55A is the ultimate shirt-pocket sized meter. Only 3/8" thick and less than 3 oz in weight with full functionality offering ac and dc voltage to 600 V,ac and dc current to 2000 ?A, resistance to 6 Meg ohm, capacitance to 2000uF, frequency to 30 kHz, diode test and continuity w/beeper. It also offers VolTect, a built-in,non-contact voltage detector for AC voltages.
Another key feature is AutoTect, which automatically selects between ac voltage, dc voltage or resistance measurement based on the test point to which the leads are connected. Fully auto-ranging, this meter offers nine different measurement functions plus features that are usually found in much more expensive and larger meters.
The digital display is over sized with large digits and unit icons in the display. In spite of its size, this meter is fully safety rated to CAT III300 V, CAT II 600 V and is UL listed.No other meter this small offers such performance and high safety ratings. Includes a silicone protective holster, deluxe carrying case,attached test leads, battery and manual.
- AutoTect feature directs the meter to know if it is measuring ac or dc volts or resistance with no user interface
- The AutoTect feature has lower input impedance which zeros out ghost voltages
- Measures ac/dc current, capacitance, frequency, continuity with beeper
- Voltect feature is a built-in, non-contact voltage detector
- Power supply 3 V standard button battery x 1 (IEC-CR2032; ANSI-NEDA-5004LC)
- Automatic Power Off
Warranty: One Year
Size: 4.4 x 2.1 x 0.4 in
Weight: Approx. 78 gm (3 oz)
Safety: CAT II 600 V,CAT III 300 V,Pollution Degree 2, Class 2
Product No Longer Available
Fluke Networks 10210101
4-Wire In-Line Modular Adapter with K-Plug
The Fluke Networks 10210101 In-line Modular Adapter (4, 6, and 8-wire)
In-line banjo modular adapters permit testing on working lines without disrupting service.
Quickly determine whether the trouble is in the phone or in the line.
- Easily complete testing and obtain circuit access on working lines without disrupting service
- Clear circuit markings on the sides and bottom of the unit
- Test line status with the 4-wire modular adapter
Spare Modular Adapter Cords (standard and K-plugs)
In-line banjo modular adapters feature replaceable adapter cords which enable broken jack
clips to be replaced without discarding the entire unit. K-plug versions have rugged jack clips.
Product No Longer Available
Fluke Networks 10220101
6-Wire In-Line Modular Adapter with K-Plug
The Fluke Networks In-line Modular Adapter (4, 6, and 8-wire)
In-line banjo modular adapters permit testing on working lines without disrupting service.
Quickly determine whether the trouble is in the phone or in the line.
- Easily complete testing and obtain circuit access on working lines without disrupting service
- Clear circuit markings on the sides and bottom of the unit
- Test line status with the 4-wire modular adapter
Spare Modular Adapter Cords (standard and K-plugs)
In-line banjo modular adapters feature replaceable adapter cords which enable broken jack
clips to be replaced without discarding the entire unit. K-plug versions have rugged jack clips.
Product No Longer Available
19800009 Fluke Networks TS19 Test Set with ABN
The Fluke Netowrks TS19 test set combines all the essential test set features at an affordable price. This test
set was specifically designed for in-house telecom technicians. Its high impedance
monitor prevents accidental disruption of service from clipping onto a data line while in
Monitor Mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF)
or pulse operation, talk/monitor capabilities, polarity test button and last number redial
make this test set the perfect combination of features and price.
- High impedance DataSafe operation in monitor mode
- Tone (DTMF) and pulse operation
- Last number redial
- Polarity indication in talk mode
Fluke Part Number 19800009
Product No Longer Available
