Key Features:

• Heavy duty, 18 gauge steel top & bottom halves finished in contempra grey powder paint.
• Easy to machine 0.064" thick aluminum panels, front finished in satin black and vented back finished in contempra grey.
• Rear panel is vented top and bottom.
• 6-32 Philips nickel plated screws and self- adhesive rubber feet included.
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).

Key Features:

• Heavy duty, 18 gauge steel top & bottom halves finished in contempra grey powder paint.
• Easy to machine 0.064" thick aluminum panels, front finished in satin black and vented back finished in contempra grey.
• Rear panel is vented top and bottom.
• 6-32 Philips nickel plated screws and self- adhesive rubber feet included.
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  


• Four self-tapping screws included.
  


• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  


• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  


• Four self-tapping screws included.
  


• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  


• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• "1411" series - 0.04" thick aluminum
  
• Four self-tapping screws included.
  
• Steel finished in ASA 61 grey baked powder paint (inside & outside).
  
• Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
  

Key Features:

• Heavy duty, 18 gauge steel - top & bottom case in satin black.
  
• Easy to machine 0.064" thick aluminum front and rear panels (one satin black and one contempra grey for each enclosure).
  
• Symmetrical design so either end panel can be used as a front or rear panel.
  
• 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
  
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).
  

Key Features:

• Heavy duty, 18 gauge steel - top & bottom case in satin black.
  
• Easy to machine 0.064� thick aluminum front and rear panels (one satin black and one contempra grey for each enclosure).
  
• Symmetrical design so either end panel can be used as a front or rear panel.
  
• 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
  
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).
  

Key Features:

• Heavy duty, 18 gauge steel - top & bottom case in satin black.
  
• Easy to machine 0.064� thick aluminum front and rear panels (one satin black and one contempra grey for each enclosure).
  
• Symmetrical design so either end panel can be used as a front or rear panel.
  
• 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
  
• Replacement screws 1421J6 (Pkg. of 6, 6-32 Philips head screws).
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  

Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
  
• Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
  
• Quantity four (4) 6-32 x 1/2" machine screws secure lid (or six (6) in 1590D, 1590DD, 1590DE, 1590E, 1590EE & 1590R1 or eight (8) in the 1590F) - into factory tapped holes. See drawings and/or photos for details.
  
• Designed to meet IP54 (see gasket kit accessory below to meet IP66).
  
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.