Heat Guns

HG-001VT Variable Temperature Electric Heat Gun

The ECG HG-001VT is a general purpose economy heat gun with 2-speed motor and electronic variable control dial for temperatures ranging from +250°F (+121°C) to +1100°F (+593°C). Solid state construction and high quality heat element make this the perfect heat gun for hobbyists, DIY enthusiasts, engineers, electricians, automotive and marine repair.

ECG HG-300D Mini Heat Gun

This ECG HG-300D Miniature Heat Gun is a 350 Watt heat gun.The HG-300D model is lightweight and has 2 speeds for quiet operation. With two temperature settings this heat gun is perfect for heat shrink tubing, embossing, and drying paints, glues, and inks. It features a built-in bracket for self-support and tabletop use, providing added convenience.

J-220 ECG Butane Stand-Up Torch

ECG J-220 Butane Stand-Up Torch

Cordless, compact torch with piezo electronic ignition. Features a 220 minute refillable butane gas tank, adjustable air flow control valve, adjustable gas flow control valve, safety KILL/OFF switch, brass body covered with protective grip and a sturdy removable base for added safety. Approximate temperature +2500°F (+1300°C).

J-500 Butane Soldering Iron and Torch

Cordless, butane powered, pocket size soldering iron & torch ready to use within 20 seconds. Approximate temperature soldering iron +410°F (+210°C) to +750°F (+399°C) as a torch +2500°F (+1300°C). Operating capacity 30 minutes at mid setting (one gas filling). Electrical power equivalent to 30W-70W corded iron. Includes butane soldering iron, protective cap with igniter, 1mm conical tip, torch tip. Manufactured to UL standards.

J-700KT ECG Butane Soldering Iron Kit

ECG J-700KT Butane Soldering Iron Kit

• 25 to 80 Watt performance equivalent to a corded soldering iron
• Operating time up to 120 minutes
• 4-IN-1 use:
  Soldering: 410° to 850°F (20 sec)
  Hot Knife: 410° to 850°F (20 sec)
  Torch: 2500°F (instant)
  Heat Blower: up to 1300°F (10 sec)
• Includes:
  Butane soldering iron
  Protective cap with igniter - Stand
  1mm conical tip - Solder - Torch-tip
  Wiping sponge - Hot blower tip
  Hot knife tip - Carrying case

J-900 Butane Flameless Heat Gun

Cordless, flameless butane heat gun with automatic piezo electronic ignition. Approximate temperature adjusts up to +1400ºF (+760ºC). Operating capacity 120 minutes at mid setting (one gas filling).

Includes: heat gun, deflector heat shield & stand. (butane not included)

Master Appliance EC-200K Heat Gun Kit

This Master Appliance EC-200K Heat Gun kit features a variable temperature heat gun with an adjustable range from 100 to 930 degrees Fahrenheit, allowing precise temperature control for various applications. The Master EC-200K comes with 2 fan speeds, you can customize the airflow to suit your needs.

EC-200 Master Appliance Heat Gun, Variable Temperature, Ecoheat

This Master Appliance EC-200 Ecoheat heat gun offers an adjustable range from 100 to 930 degrees Fahrenheit, providing precise temperature control for various tasks. The EC-200 is equipped with two fan speeds, you can customize the airflow to suit your specific needs. Weighing only 1 lb., the Master EC-200 heat gun is lightweight and ergonomically designed, allowing you to comfortably hold it at any angle for extended periods, minimizing fatigue.

Contact Us for The Best Price

Master Mite Heat Gun | 10008 Master Appliance

Master 10008 Master Mite Heat Gun bench-top heating system.

• Complete system comes standard with 650ºF heating element, adjustable stand and heat shrink attachment
• Ideal heat & air flow (3.8 CFM), performs benchtop heating jobs without excess air flow, won't blow components around work station
• Quiet running motor, eliminates noisy production areas
• 3 optional easy-to-change plug-in heating elements available: 500º, 650º & 800ºF
• Use to activate adhesive, cure epoxies, dry components, melt solder preforms, remove decals, shrink tubing and more.

SPECIFICATIONS:
Ave. Air Volume: 3.8 CFM
Ave. Air Velocity: 700 FPM
Motor: Shaded Pole
Dimensions: 8.8" L x 3.3" W x 7" H
Nozzle Opening: 1" Dia.
Cordset: 7 ft.
Net Weight: 1.7 lbs.

Ecoheat Heat Gun Kit | EC-100K Master Appliance

The Master Appliance EC-100K is a Economical, light weight, multi-use heat gun available separately or as kit with storage case and four specialized nozzle attachments.

• Two heat settings: 500° & 1000° F - Accommodates many automotive and commercial applications.
• Two fan speeds - Low & High (7 & 9 CFM)
• Resettable thermostat - Protects element against over heating
• Lightweight - 1 lb. - Easy to hold at any angle for long periods of time, eliminates operator fatigue
• Built-in hand guard - Protects hand and fingers. Recessed switch guards against knocks and bumps
• 3-wire grounded cord set - A positive grounding system for user safety
• UL and CUL listed - Safety agency tested & approved for user safety
• Thermoplastic housing - for high impact durability
• Built-in Stand - Very stable, allows user to set heat gun down in an upright position.
• Use to bend and form plastics, dry body fillers, remove decals, spot dry paint, shrink tubing, packaging and more

Kit consists of:
EC-100 Heat Gun, 7/8" air reducer attachment, 1 shrink tubing attachment, 1-15/16" and 3-1/8" spreader attachments packed in a durable storage & carrying case.

Product No Longer Available - Replaced by Master EC-200K

902-458 Eclipse Tools Digital Heat Gun, LCD Display

Eclipse Tools 902-458 Digital Heat Gun, LCD Display

• Digital LCD display
• Smart overheat protection design
• Automatic cool air flow to reduce cool down time
• 2 temperature settings 300°C ~ 500°C
• Includes 4 nozzles and 1 scraping tool
• Blow-molded carrying case

9SS-900-A1 Eclipse Tools Replacement Nozzle for SS-989A Single F2.2 ID 22mm

Eclipse Tools 9SS-900-A1 Replacement Nozzle for SS-989A Single F2.2 ID 22mm

• Replacement Nozzle for SS-989A/SS-989E
• Single F2.2 ID 22mm

9SS-900-A2 Eclipse Tools Replacement Nozzle for SS-989A Single F6.6 ID 22mm

Eclipse Tools 9SS-900-A2 Replacement Nozzle for SS-989A Single F6.6 ID 22mm

• Replacement Nozzle for SS-989A/SS-989E
• Single F6.6 ID 22mm

9SS-900-A3 Eclipse Tools Replacement Nozzle for SS-989A Single F8.5 ID 22mm

Eclipse Tools 9SS-900-A3 Replacement Nozzle for SS-989A Single F8.5 ID 22mm

-

9SS-900-B Eclipse Tools Replacement Nozzle for SS-989A QFP Single 10.2x10.2 ID 22mm

Eclipse Tools 9SS-900-B Replacement Nozzle for SS-989A QFP Single 10.2x10.2 ID 22mm

• Replacement Nozzle for SS-989A/SS-989E
• Single 10.2x10.2 ID 22mm

9SS-900-C Eclipse Tools Replacement Nozzle for SS-989A QFP Single 15.2x15.2 ID 22mm

Eclipse Tools 9SS-900-C Replacement Nozzle for SS-989A QFP Single 15.2x15.2 ID 22mm

• Replacement Nozzle for SS-989A/SS-989E
• Single 15.2x15.2 ID 22mm

9SS-900-D Eclipse Tools Replacement Nozzle for SS-989A QFP Single 19.2x19.2 ID 22mm

Eclipse Tools 9SS-900-D Replacement Nozzle for SS-989A QFP Single 19.2x19.2 ID 22mm

Replacement Nozzle for SS-989A QFP Single 19.2x19.2 ID 22mm

9SS-900-E Eclipse Tools Replacement Nozzle for SS-989A QFP Single 15.2x21.2 ID 22mm

Eclipse Tools 9SS-900-E Replacement Nozzle for SS-989A QFP Single 15.2x21.2 ID 22mm

Replacement Nozzle for SS-989A QFP Single 15.2x21.2 ID 22mm

9SS-900-F Eclipse Tools Replacement Nozzle for SS-989A QFP Single 29.7x29.7 ID 22mm

Eclipse Tools 9SS-900-F Replacement Nozzle for SS-989A QFP Single 29.7x29.7 ID 22mm

Replacement Nozzle for SS-989A/SS-989E - Single 29.7x29.7 ID 22mm

9SS-900-H Eclipse Tools Replacement Nozzle for SS-989A SOP Single 4.8x10 ID 22mm

Eclipse Tools 9SS-900-H Replacement Nozzle for SS-989A SOP Single 4.8x10 ID 22mm

Replacement Nozzle for SS-989A/SS-989E - SOP Single 4.8x10 ID 22mm