Submit search
Specifications:
701K Includes:
All kit components are available individually
Transmitter and receiver are equipped with female F-type connectors and provide both audible and LED test and tone indications. Optional adapter test leads allow 402K use on distribution cables as well as wire pairs or signal conductors. User defined tone output allows up to four 402T Toner units to be used simultaneously for tracing multiple cable runs.
As a continuity tester, the 402K provides both audible tone and LED display to indicate resistance levels and identifies the presence of AC or DC voltage on the cable under test. The newly-designed 402R receiver provides three methods of signal reception:
The 402K CATV Cable Tone Test Kit consists of one transmitter, one receiver, one male F-to-F connector adapter, one male F-to-alligator clip adapter cable and the rugged 700C Carrying Case (also available separately.)
Features:
Battery life
Transmitter, 25+ hrs, receiver, 50+ hrs (nominal)
Tone output
Pulsing, 15 dBm into 75 ohms, alternating, 18 dBm into 75 ohms
Transmitter frequency
75 KHz nominal
Voltage protection
Transmitter, 60V (in OFF position); receiver, 50V
High impact ABS housings
Woven polyester case, 14.4 oz total kit
Consisting of the 77M Tone Generator and the 200B Inductive Amplifier, this kit can be used on single conductors, twisted pairs, coaxial cables and de-energized electrical wiring. Both units come housed in a polyester zipper pouch
Power requirements
one 9V battery, nominal life 50 hrs
Transmitter Frequency
900/1100Hz alternating, 900Hz constant nominal
Transmitter Power into 600 ohms
7 dBm
Voltage Protection at 600 ohms in CONT
52 VDC (77HP/6A 60 VDC) (all units provide higher voltage protection in OFF/TONE modes)
High impact ABS case
1.25 x 2.25 x 2.5", 24" test leads, 4.5 oz w/battery
Power
One 9V battery, nominal life 50 hrs
Probe tip resistance
Metal 0 ohms, plastic 300 ohms minimum
Input impedance
3.5M ohms
Gain
26 dB
Size
1.125 x 2.125 x 9", 5.5 oz w/battery
The 77GX Tone Generator incorporates a host of features including microprocessor controlled circuitry for increased reliability, three selectable tone outputs for multiple line identification, two-line polarity indication for fast outlet checks and selectable power outputs for use on open or shorted pairs. The 200GX Inductive Amplifier features a simple, one-button operation and comfortable, ergonomic design. The adjustable volume control, LED visual signal strength indication, and powerful speaker make the 200GX ideal for noisy environments. To provide a single solution for the professional - Tempo's 711K Professional Tone and Probe Kit combining the 77GX Tone Generator and 200GX Inductive Amplifier in a rugged carrying case.
711K Includes:
77GX Tone Generator
200GX Inductive Amplifier
Rugged, woven polyester 700C Dual Carrying Case
The TEMPO Communications 801K Tone and Probe Kit comprises the 77HP/6A High Power Tone Generator and the 200FP Inductive Amplifier in a rugged woven polyester carrying case. The 801K represents the top-of-the range in wire and cable identification. When first turned on the 200FP is in the normal tone probe mode, detecting and playing most voice frequency signals. With a short press of the control button the probe enters the filtered mode, eliminating the hum and buzz created by light fixtures and power lines.