1916-2-100-4 Kendall Howard 4U V-Rack
Kendall Howard 1916-2-100-4 4U V-Rack
Kendall Howard
V-Racks allow you to vertically or horizontally mount servers or other
rack-mountable devices regardless of depth. Designed to mount on a wall
or under a desk, the Kendall Howard V-Rack provides users more
versatility on where they can place their products while saving them
space.
- Low profile design
- No depth restrictions
- Cage Nut style rails
- 150 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
Kendall Howard part number 1916-2-100-4
Before ordering, you must Contact Us for Best Shipping Rates
1915-3-300-12 Kendall Howard 12U V-Line Wall Mount Rack
Kendall Howard 1915-3-300-12 12U V-Line Wall Mount Rack
Kendall Howard
V-Line Open Frame Fixed wall mount racks are the perfect low cost
solution that IT Installers and AV Technicians use every day. Kendall
Howard knockdown 12U Fixed Wall Racks are incredibly easy to assemble
and install.
- 12" maximum mounting depth
- Universal cage nut style rails
- Bolt-together design
- Includes 24 Rack Screws and Cage Nuts
- Self-squaring design
- Made in the USA
- Limited Lifetime Warranty
1915-3-400-04 Kendall Howard 4U Pivot Frame Wall Mount Rack
Kendall Howard 1915-3-400-04 4U Pivot Frame Wall Mount Rack
The Kendall Howard 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections - a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12" depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.
1915-3-001-08 Kendall Howard 8U Wall Mount Rack
Kendall Howard 1915-3-001-08 8U Wall Mount Rack
This was the first
wall mount rack that Kendall Howard designed. It did not take long for
this rack to become the standard that all wall mount racks are measured
against.
- 2-piece design installs in less than 5 minutes
- Adjusts to any width
- Standard pre-tapped 10-32 rails
- 18" maximum depth
- Units can be ganged vertically
- Made in the USA
- Limited Lifetime Warranty
SHELF NOT INCLUDED
1915-3-400-08 Kendall Howard 8U Pivot Frame Wall Mount Rack
Kendall Howard 1915-3-400-08 8U Pivot Frame Wall Mount Rack
- Pivoting rackmount frame swings down to allow easy access to the rear of installed network equipment. An integrated positive stop prevents the frame from being opened more than 90 degrees to avoid causing damage or strain to your equipment and connections. A latching mechanism securely holds the frame in a closed position.
- Open frame design allows the rack to be installed over existing equipment without having to remove and re-terminate network cables. Its design and the laser knockouts on both sides of the rack also provide numerous locations for routing cabling in and out of the rack.
- The rear lacing panels on either side of the rack allow for excess cabling to be secured with the use of Hook and Loop Cable Ties.
- Rack ships completely assembled making installation easy. Simply remove the rack from the packaging, mount to the wall with mounting hardware (sold separately), and install your components with the included 10-32 rack screws. (Includes 12 rack screws)
- The heavy duty steel construction makes the rack capable of supporting up to 75 lbs. of network equipment in both the open and closed position.
WM-8-12 Middle Atlantic Relay Rack, Wall Mount, RU8
Middle Atlantic WM-8-12 Relay Rack, Wall Mount, RU8
Mount virtually any data or telecommunications component on this self-squaring Wall Mount rack. Self-aligning design makes this open frame rack quick and easy to assemble. Ideal for wall mounting fiber-optic equipment, its fixed design prevents kinking or breaking of glass fibers. Rugged steel construction; includes rack screws.
Middle Atlantic WM-8-18 Wall Mount Relay Rack
The Middle Atlantic WM-8-18 Wall Mount Relay Rack is a self-squaring wall mount relay rack that provides a secure mounting solution for a wide range of components. The WM-8-18 has a self-aligning design that ensures quick and effortless assembly of the open frame rack. Specifically designed for wall mounting fiber-optic equipment, it offers a fixed configuration that prevents any potential damage to delicate glass fibers. Crafted with rugged steel construction, this relay rack guarantees durability and reliability. Included rack screws provide added convenience during installation. Upgrade your infrastructure with the Middle Atlantic WM-8-18 Wall Mount Relay Rack for a seamless and efficient setup.
1916-2-100-3 Kendall Howard 3U V-Rack
Kendall Howard 1916-2-100-3 3U V-Rack
Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.
- Low profile design
- No depth restrictions
- Cage Nut style rails
- 150 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
Before ordering, you must Contact Us for Best Shipping Rates
1916-2-100-2 Kendall Howard 2U V-Rack
Kendall Howard 1916-2-100-2 2U V-Rack
Kendall Howard V-Racks allow you to vertically or horizontally mount servers or other rack-mountable devices regardless of depth. Designed to mount on a wall or under a desk, the Kendall Howard V-Rack provides users more versatility on where they can place their products while saving them space.
- Low profile design
- No depth restrictions
- Cage Nut style rails
- 150 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
Before ordering, you must Contact Us for Best Shipping Rates
1915-3-301-12 Kendall Howard 12U V-Line Wall Mount Rack - 18" Depth
Kendall Howard 1915-3-301-12 12U V-Line Wall Mount Rack - 18" Depth
The Kendall Howard 12U 18" Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 12U 18" Deep V-Line Wall Mount Rack.
- 18" usable depth
- Cage Nut or 10-32 Tapped Rails
- 19" EIA 310-D compliant
- Made in the USA
- Limited Lifetime Warranty
Before ordering, you must Contact Us for Best Shipping Rates
1915-3-301-16 Kendall Howard 16U V-Line Wall Mount Rack - 18" Depth
Kendall Howard 1915-3-301-16 16U V-Line Wall Mount Rack - 18" Depth
The Kendall Howard 16U 18" Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 16U 18" Deep V-Line Wall Mount Rack.
- 18"? usable depth
- Cage Nut or 10-32 Tapped Rails
- 19"? EIA 310-D compliant
- Made in the USA
- Limited Lifetime Warranty
Before ordering, you must Contact Us for Best Shipping Rates
1915-3-301-21 Kendall Howard 21U V-Line Wall Mount Rack - 18" Depth
Kendall Howard 1915-3-301-21 21U V-Line Wall Mount Rack - 18" Depth
The Kendall Howard 21U 18" Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 21U 18" Deep V-Line Wall Mount Rack.
- 18" usable depth
- Cage Nut or 10-32 Tapped Rails
- 19" EIA 310-D compliant
- Made in the USA
- Limited Lifetime Warranty
Before ordering, you must Contact Us for Best Shipping Rates