Eclipse Tools 900-043 Plastic Box - two sided lids 6.5 X 3.75 X 1.75

Lid opens on both sides doubling the number of items to be stored. Five compartments on one side, eight on the other. Dimensions are 6.5"x3.75"x1.75".

Plastic Enclosure
Vertical Card Position: 3
Mounting Bosses: 4

Philmore PB155 Plastic Box with Aluminum Lid

Philmore Electronics part number PB155

PLASTIC UTILITY BOXES
Slotted for circuit boards.
Black ABS plastic.
Hardware Included
90-880 - 2 1/8"L x 4 1/8"W x 1 3/4"H
90-881 - 2 1/2"L x 5 1/8"W x 1 3/4"H
90-882 - 3 1/2"L x 5 7/8"W x 2 1/2"H
90-883 - 4 1/2"L x 7 3/8"W x 2 9/16"H

PLASTIC UTILITY BOXES
Slotted for circuit boards.
Black ABS plastic.
Hardware Included
90-880 - 2 1/8"L x 4 1/8"W x 1 3/4"H
90-881 - 2 1/2"L x 5 1/8"W x 1 3/4"H
90-882 - 3 1/2"L x 5 7/8"W x 2 1/2"H
90-883 - 4 1/2"L x 7 3/8"W x 2 9/16"H

PLASTIC UTILITY BOXES
Slotted for circuit boards.
Black ABS plastic.
Hardware Included
90-880 - 2 1/8"L x 4 1/8"W x 1 3/4"H
90-881 - 2 1/2"L x 5 1/8"W x 1 3/4"H
90-882 - 3 1/2"L x 5 7/8"W x 2 1/2"H
90-883 - 4 1/2"L x 7 3/8"W x 2 9/16"H

PLASTIC UTILITY BOXES
Slotted for circuit boards.
Black ABS plastic.
Hardware Included
90-880 - 2 1/8"L x 4 1/8"W x 1 3/4"H
90-881 - 2 1/2"L x 5 1/8"W x 1 3/4"H
90-882 - 3 1/2"L x 5 7/8"W x 2 1/2"H
90-883 - 4 1/2"L x 7 3/8"W x 2 9/16"H

Hammond 1591ASBK Multipurpose Plastic Enclosure - Economical Version - 3.9"L x 2.0"W x 0.8"D - Black

• Electronic instrument enclosures, ideally the Hammond 1591ASBK is suited for mounting printed circuit boards.
  


• Integral card guides accept 1.5 mm (0.062") P.C. cards.
  


• Lap joint construction provides protection against access of dust and splashing water.
  


• Designed to meet IP54
  


• Molded from economical black or grey plastic
  


• Lid is secured with self-tapping #4 x 0.5" philips screws (black screws included with black enclosures, nickel finish included with grey enclosures).
  

Key Features:

• Electronic instrument enclosures, ideally the Hammond 1591BSBK is suited for mounting printed circuit boards.
  
• Integral card guides accept 1.5 mm (0.062") P.C. cards.
  
• Lap joint construction provides protection against access of dust and splashing water.
  
• Designed to meet IP54
  
• Molded from economical black or grey plastic
  
• Lid is secured with self-tapping #4 x 0.5" philips screws (black screws included with black enclosures, nickel finish included with grey enclosures).
  

Key Features:

• Electronic instrument enclosures, ideally the Hammond 1591CSBK is suited for mounting printed circuit boards.
  
• Integral card guides accept 1.5 mm (0.062") P.C. cards.
  
• Lap joint construction provides protection against access of dust and splashing water.
  
• Designed to meet IP54
  
• Molded from economical black or grey plastic
  
• Lid is secured with self-tapping #4 x 0.5" philips screws (black screws included with black enclosures, nickel finish included with grey enclosures).
  

Key Features:

• Electronic instrument enclosures, ideally the Hammond 1591DSBK is suited for mounting printed circuit boards.
  
• Integral card guides accept 1.5 mm (0.062") P.C. cards.
  
• Lap joint construction provides protection against access of dust and splashing water.
  
• Designed to meet IP54
  
• Molded from economical black or grey plastic
  
• Lid is secured with self-tapping #4 x 0.5" philips screws (black screws included with black enclosures, nickel finish included with grey enclosures).
  

Key Features:

• Electronic instrument enclosures, ideally the Hammond 1591ESBK is suited for mounting printed circuit boards.
  
• Integral card guides accept 1.5 mm (0.062") P.C. cards.
  
• Lap joint construction provides protection against access of dust and splashing water.
  
• Designed to meet IP54
  
• Molded from economical black or grey plastic
  
• Lid is secured with self-tapping #4 x 0.5" philips screws (black screws included with black enclosures, nickel finish included with grey enclosures).
  

Hammond 1591LSBK Multipurpose Plastic Enclosure - Economical Version - 3.3"L x 2.2"W x 1.4"D - Black

• Electronic instrument enclosures, ideally the Hammond 1591LSBK is suited for mounting printed circuit boards.
  


• Integral card guides accept 1.5 mm (0.062") P.C. cards.
  


• Lap joint construction provides protection against access of dust and splashing water.
  


• Designed to meet IP54
  


• Molded from economical black or grey plastic
  


• Lid is secured with self-tapping #4 x 0.5" philips screws (black screws included with black enclosures, nickel finish included with grey enclosures).
  

Hammond 1591EBK Plastic Enclosure Flame Retardant ABS 7.48"L x 4.33"W x 2.386"D Black

• Ideally suited for vertical mounting of printed circuit boards (internal side walls include molded in card guides).
• Integral card guides accept 1.5 mm (0.062") P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from easy to machine flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
• Lid is secured with M3 x 10 mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
• Black enclosures include black screws, all others - standard nickel finish screws.

Part Number Hammond 1591EBK

Hammond 1599KBK Hand Held Enclosure 8.66 in x 5.50 in x 1.60 in

• Attractively styled and ergonomically designed for use as a �hand-held� instrument enclosure.
• Standard version is molded from flame retardant ABS plastic (rated UL94V-0) and is assembled with machine screws into integral brass bushings.
• Economy version is molded from economical plastic (not flame retardant) and is assembled with self-tapping screws into plastic posts.
• Recessed top for membrane display or pad.
• Lap joint construction provides protection against access of dust and splashing water.
• Extra deep top and ultra shallow base are specifically designed to enhance the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency.
• Designed to meet IP54.
• Two keyhole knockouts are molded into the inside of the base to facilitate wall mounting installation.

Hammond Manufacturing Part Number 1599 KBK