PowerbridgeTSPBIWCVAH-BK Total Solution In-Wall A/V & Power Extension Kit - Black Plates

The In-Wall Power Extension and Cable Management System for any on-wall mounted LCD, Plasma, LED and LCD HDTV.

Designed specifically to allow professional installation appearance to hide AV Cables in-wall and provide pass-thru or cable-connection jacks.

• Total Flexible Design: The unique Patent Pending Slim-Line Design is less than 3" high and 9" long, shaped like most wall mounts. Installs directly below, above, in-between the wall mount or vertically next to a single-stud mount. The only design that will hide behind any size or type wall mounted HDTV. The AV CablePass is reversible to in-wall as a scoop or outward as a hood to protect cables from being crunched behind heavy AV equipment. Also removable to allow any Decora insert for cable port-connection.
• Total Protection: PowerBridge allows for connection to external power surge protection units to fully protect expensive TV's that can't be protected by a standard wired power outlet.
• Total Assurance: PowerBridge is Agency tested by ETL and listed to meet strict US/UL and Canadian/CSA electrical standards.
• Safe to Install: PowerBridge is not wired into or makes direct connection to the actual electrical wiring/circuit. In otherwords, you're safe, no risk of shock you will not be in contact with live electricty during installation. We made it easy with color-coded wire connections and clear, easy to understand instructions with pictures. Usual installation time is less than 30 minutes.
• Save Money: No electrician needed. DIY, easy to install. Everything included, instructions and wall-cutout template, all you need is basic tools.

PowerBridge Total Solution In-Wall Power Extension Kit: #TSPBIW-CVAH
QTY	Description
1)	PowerOUT Wall Plate with 1" recessed plug with Component Video Audio + Single HDMI CableConnect Installed behind TV
1)	PowerIN Wall Plate with Component Video Audio + Single HDMI CableConnect Installed below TV near existing power outlet or behind AV equipment
2)	In-Wall junction boxes (UL Rated PVC type - not metal type) Retro-fit design for drywall installation into standard 2x4/6 frame construction wall
1)	6' Power Cord (White) (Black w/BK kit) Used to plug into PowerIN wall plate to energize power from surge protector/existing power outlet
1)	6' In-Wall Power Wire NM-Type 14/2 UL rated ROMEX Used in-wall to connect PowerIN wall plate to PowerOUT wall plate
1)	Printed Instructions, template for wall cut-out, 1 Year Limited Warranty

Powerbridge TWO-PRO In-Wall Dual Power Cable Management

TWO-PRO - PRO-Series - Dual Power + Cable Pass

DIY kit includes pre-stripped in-wall power-wire.

Designed with simplicity in mind for easy installation.

Basic wiring connections and assembly required.

Compatible with all TV's including Samsung flat-plug power cords. Compatible with all types of low-profile wall-mounts.

Deep recessed dual-receptacle allow for TV and co-located wall-mounted SoundBar power connection.

• Dual Outlet
• AV CablePass Management
• Ultra Low-Profile Mount Capatible
• Flat-Plug Compatible

Calrad 28-TVBU505 Recessed Two Gang Combo Box

Calrad 28-TVBU505 RECESSED TWO GANG COMBO BOX
Allows you to mount LCD and plasma TVs, and other system components flush against the wall. This two-gang box is a combo box with half 110V for power and half low voltage for Class 2 wiring of satellite or cable TV, speakers, surround- sound, etc. Mounting "wings" tighten against the wall board or screwed directly to the stud to hold the box firmly in place. There's no wobble. Plugs stay inside - don't protrude past the wall! for a secure installation. Available in a white or black finish. Material paintable ABS plastic. All the necessary mounting hardware is included.

28-LV1RP Calrad Distribution Mounting Bracket, Single Gang

Calrad Electronics 28-LV1RP Single Gang Distribution Mounting Bracket

This single gang low voltage bulk cable mounting bracket is designed for easy installation. Can be installed quickly using a 3.5” hole saw in 1/4" to 1 1/2" dry wall. Can also be used with our 28 series designer style wall plates.

Dimensions: 3.8" W x 5.6"H x 2.0" D
Total Internal Depth: 1 7/8" Measured from the back of flange
Color: White

28-LV2RP Calrad Distribution Mounting Bracket, Dual Gang

Calrad Electronics 28-LV2RP Dual Gang Distribution Mounting Bracket

This dual gang low voltage bulk cable mounting bracket is designed for easy installation. Can be installed quickly using a 4.5” hole saw in 1/4" to 1 1/2" dry wall. Can also be used with our 28 series designer style wall plates.

Dimensions: 5 3/8" W x 5 1/4"H x 2 1/8" D
Total Internal Depth: 2" Measured from the back of flange
Color: White