40-950 Calrad Stereo Audio Line Pre-Amplifier
40-950
Stereo Audio Line Pre-Amplifier
Calrad's compact stereo pre-amplifier is ideal for audio distribution systems where sources may have different output levels. The small size and attached mounting tabs make it easy to install the amplifier in the wall, directly behind video displays or in equipment racks. The output and input are L+R RCA jacks. Adjustable volume control. Adjust the pre-amp gain so your source is matched with the others before entering your distribution or zone amps.
Calrad 10-115 Stereo Headphone Preamp
STEREO HEADPHONE AMPLIFIER
2 inputs with individual volume controls. 200mw output at 8 ohms. Line input: 1V/47K.
RCA input jacks, 3.5mm output jack. AC adapter 12Vdc, 200Ma included. Black shielded
metal chassis.
Size: 4.3"W x 1.7"H x 3.4"D
Calrad 80-574 Stereo Phone Preamp
80-574
Stereo Phone Preamp
The Calrad Stereo phono preamp with external low noise DC power supply.
RCA IN/OUT. Input: 5mv/100K ohm / 1khz
maximum input: 30mv.
Frequency response:18-20khz.
S/N ratio: >50db.
12Vdc power supply included.
Shielded metal chassis.
Power Supply with 6 ft cord.
Calrad 80-575-H Headphone Pre-Amp
Product Description:
80-575-h.....Headphone amp
80-575-l......Line pre-amp
80-575-m.....Microphone pre-amp
80-575-p.....Phono pre-amp
Select from 4 standard stereo configurations. A few components are easily changed on the PC board for each preamp. The unit is available in a chassis, or completed circuit board with labeled black face plate. Includes DC power adapter. Optional RCA to XLR adapter cable 10-142-5 for mic preamp.
Specifications:
Input/Output Jacks RCA Type
Output Impedance 5K, Factory Adjusted
Power 9VDC, 2.5mm Coax Jack
Gain Adjustable
Input Impedance Factory Adjusted
Frequency Response 20HZ - 20KHZ, + - 3 DB
Size 4.5" L x 3" W x 1.5" H
Calrad 80-575-L Line Pre-Amp
Product Description:
80-575-h......Headphone amp
80-575-l......Line pre-amp
80-575-m......Microphone pre-amp
80-575-p......Phono pre-amp
Select from 4 standard stereo configurations. A few components are easily changed on the PC board for each preamp. The unit is available in a chassis, or completed circuit board with labeled black face plate. Includes DC power adapter. Optional RCA to XLR adapter cable 10-142-5 for mic preamp.
Specifications:
Input/Output Jacks RCA Type
Output Impedance 5K, Factory Adjusted
Power 9VDC, 2.5mm Coax Jack
Gain Adjustable
Input Impedance Factory Adjusted
Frequency Response 20HZ - 20KHZ, + - 3 DB
Size 4.5" L x 3" W x 1.5" H
Calrad 80-575-M Microphone Pre-Amp
Product Description:
80-575-h.....Headphone amp
80-575-l.....Line pre-amp
80-575-m.....Microphone pre-amp
80-575-p.....Phono pre-amp
Select from 4 standard stereo configurations. A few components are easily changed on the PC board for each preamp. The unit is available in a chassis, or completed circuit board with labeled black face plate. Includes DC power adapter. Optional RCA to XLR adapter cable 10-142-5 for mic preamp.
Specifications:
Input/Output Jacks RCA Type
Output Impedance 5K, Factory Adjusted
Power 9VDC, 2.5mm Coax Jack
Gain Adjustable
Input Impedance Factory Adjusted
Frequency Response 20HZ - 20KHZ, + - 3 DB
Size 4.5" L x 3" W x 1.5" H
Calrad 80-575-P Phone Pre-Amp
Product Description:
80-575-h.....Headphone amp
80-575-l.....Line pre-amp
80-575-m.....Microphone pre-amp
80-575-p.....Phono pre-amp
Select from 4 standard stereo configurations. A few components are easily changed on the PC board for each preamp. The unit is available in a chassis, or completed circuit board with labeled black face plate. Includes DC power adapter. Optional RCA to XLR adapter cable 10-142-5 for mic preamp.
Specifications:
Input/Output Jacks RCA Type
Output Impedance 5K, Factory Adjusted
Power 9VDC, 2.5mm Coax Jack
Gain Adjustable
Input Impedance Factory Adjusted
Frequency Response 20HZ - 20KHZ, + - 3 DB
Size 4.5" L x 3" W x 1.5" H