Submit search
This Calrad IR repeater system extends IR (Infrared) remote control signals from one location to another. The IR receiver is typically located on a TV display and receives IR signals from remote controls up to maximum of 33 ft. and re-transmits them to the 6 Port IR distribution block. The 6 x standard IR emitter ports re-transmits the IR signals to multiple pieces of individual equipment using 3 x dual non-flashing IR emitters. This 92-180A IR distribution block requires a 12Vdc power supply (included) or can work through the optional USB type �B� port on 5Vdc, See Diagram 1A below for typical configuration and hookup. Two Additional IR receiver ports are available for adding two additional IR receivers for multi-room control, Calrad IR Receiver part number, 92-181.
IR Receiver: Each system needs a minimum of one IR Receiver (maximum of 3). You can use an extra IR Receiver to operate your A/V equipment from another room. Additional IR Receivers, Part No: 92-181.
IR Emitters:
IR Distribution Block: The IR Distribution Block is the main component where the 12Vdc power supply and (Optional 5VdcU SB Power Port), IR Receiver-Receivers and IR Emitters connect to.
AC Power Adapter:
5Vdc Power Option (USB Type 'B' to USB Type 'A' power cable required): Connect to external USB charger or USB port on TV's or other Electronic hardware.
Package Contents: