Sensors / Detectors

This unit is perfect for monitoring an entrance or use as an entrance indicator. Uses Retro-reflective photoelectric sensor. When beamin interupted a 'ding-dong' sound or optional siren sound will occur. Speaker volume can be adjusted or turned off. When in siren mode, sounding time is adjustable from 3 to 30 seconds. Range is up to 22 feet or 7 meters. 9Vdc power adapter is included. All components plug into each other so no hard wiring is needed.

Includes the following:
1 Retro-reflective photoelectric sensor
1 Reflector
1 Speaker/electronic chime
1 9Vdc power adapter

Hardware included:
Mounting brackets X 3, Screws X 7, Drywall Anchor X 1

Specifications:
Sensing Range: ............................................22feet
Voltage Supply:..........................Sensor = 9-15Vdc
Chime = 12Vdc
Total Current Consumption: ...............100mA Max.
Standby Current: ...........................................25mA
Light Source:...............................................IR LED
Control Output: ....................... NPN open collector
...........................................(DC 30V, 100mA Max.)
Speaker Response Time:............~1 sec. for chime
30 sec. for alarm
Alarm Time Range:....Adjustable 3~30sec. for alarm
Speaker Output:..Chime/Off/Alarm (Select by switch)

INFRARED & MICROWAVE DUALTEC MOTION DETECTOR
Our most advanced motion detector using an infrared sensor to pickup thermal energy and a microwave detector to detect physical motion. This detector incorporates a new sensing circuit to process both technologies to provide a reliable triggering sensor for security systems. Features Microwave/PIR technology, single edge PIR triggering and L.E.D. indicators for IR detection, microwave detection, and alarm triggering.

Operates from 9-12Vdc, current draw 35ma. N/C dry contacts 30Vdc, 100ma. Protection coverage 35� long x 30� wide. Color: white.

95-460 IR SENSOR WITH PULSE COUNT
Small compact infrared sensor is perfect for all applications commercial or residential. Stable circuitry for reliable operation. Optional brackets for multiangle mounting on ceilings or walls. Available in form C relay for normally open, normally closed applications. Tamper switch provided, 35' x 35' coverage. Operates on 12Vdc.

DUAL GLASS BREAK DETECTOR
This sensor is used to protect areas which conventional sensors that have to be attached to each window, but this unit covers a specific area and uses a dual sensing technology to protect a larger area. The flex audio technology is sensitive to different frequencies. Ultra low end types generated by hard sharp blows to glass windows. The unit remains off until flex technology detects a blow to the glass. For an alarm condition to occur the audio must first detect the frequency of breaking glass within a defined time window. After the flex detects a blow to the glass, because both technologies must detect and verify glass breakage, false alarms are virtually eliminated. Indicator LED's provide visual indicators for various functions. Operates on 12Vdc.

Operates on 10-14Vdc. Current
draw 800mA. DC coil resistance 14
ohms. Comes with mounting
screws. Mounting plate 6.25� x .99�.
Coil body 3.5�(H) x 8�(W) x 1.1�(H).
Overall depth 1.25�.

Designed to give faultless service,
extra thin, made of black PVC
plastic, can be placed under
existing rugs, mats, etc. Copper bus
is used to connect each segment
together and is timed for long use.
Size: 29"W x 21"L.Normally open.

Dry circuit, no power required.
Protects up to 32 square feet.
Adjustable operation for N/O,
N/C circuit. Automatic reset .
Peel and stick mounting.
Available in white and gray.
Provides good visible deterrent.

Fixed dual beam infrared pulsed perimeter
detectors. Range 320' indoors, 160'
outdoors. Excellent immunity to freezing,
snow, rain, fog, and other bad weather
conditions. Antifrost design, operates with
frost or dew without false alarms.
Interruption time adjustable for nearly all
situations. N/C tamper switch included.
Power input 10-24Vdc.

Small Security Magnetic Contact.
Closed circuit with magnet in place.

Takex PA-6805E Passive Infrared Sensor - Spot protection

This Takex Passive Infrared Sensor is a ceiling mount indoor PIR sensor combined with a discreet compact appearance with outstanding performance at a low price. The PA-6805E sensor can be snapped in and out of the detachable base unit for easy installation in high places.