40-1063-HS-2 Calrad 2-Way HDMI Splitter - 1080P & 4K

Calrad 40-1063-HS-2 2-Way HDMI Splitter

This 2-Way HDMI splitter provides a simple solution for distribution of a HDTV 1080P or UHD 4K x 2K HDMI signal. A single HDMI source can be split into two separate HDMI outputs. Two L.E.D. Signal indicators provide HDMI signal connectivity on Outputs 1 and 2. Selectable EDID settings, see the typical hookup diagram below. Includes 5Vdc, 1 Amp power supply.

Specifications:
Video Resolution: Up to 4Kx2K(3840x2160@60Hz YUV 4:2:0)
Input Bandwidth Frequency: 10.2Gps
Supports: 3D, 36 Bit Color
Supports four kinds of EDID settings: mixed EDID, copy EDID, default
1080p output, default 4Kx2K output.
Audio: Supports LPCM 7.1, Dolby TrueHD, Supports LPCM 7.1, Dolby Digital
Plus,TrueHD Master Audio.
Power: 5Vdc
Size: L-2.95” x W-2.67” x H-.992”

40-1063-HS-4 Calrad 4-Way HDMI Splitter - 1080P & 4K

Calrad 40-1063-HS-4 4-Way HDMI Splitter

This 4-Way HDMI splitter provides a simple solution for distribution of a HDTV 1080P or UHD 4K x 2K HDMI signal. A single HDMI source can be split into four separate HDMI outputs. Four L.E.D. Signal indicators provide HDMI signal connectivity on Outputs 1 thru 4. Selectable EDID settings, see the typical hookup diagram below. Includes 5Vdc, 1 Amp power supply.

Specifications:
Video Resolution: Up to 4Kx2K(3840x2160@60Hz YUV 4:2:0)
Input Bandwidth Frequency: 10.2Gps
Supports: 3D, 36 Bit Color
Supports four kinds of EDID settings: mixed EDID, copy EDID, default
1080p output, default 4Kx2K output.
Audio: Supports LPCM 7.1, Dolby TrueHD, Supports LPCM 7.1, Dolby Digital
Plus,TrueHD Master Audio.
Power: 5Vdc
Size: L-4.5” x W-2.44” x H-.984”

8-Way HDMI Splitter - 4Kx2K@60 (YUV4:4:4) 3D, Ultra HD 1x8 | 40-1063-HS-8 Calrad Electronics

The Calrad 40-1063-HS-8 (8 Port) 4K x 2K distribution amplifier provides a single source to be distributed to multiple displays or to HDMI signal based hardware. Individual L.E.D. signal indicators for each channel. Reliable video signal delivery with advanced EDID management circuitry. The built-in TMDS signal amplifier can send HDMI signals up to 50 feet, but for longer cable runs, use compatible HDMI balun extenders. Supports LPCM 7.1, Dolby TrueHD, Dolby digital Plus, and DTS-HD Master Audio formats. Perfect for 1:1 video signal delivery with 8 outputs for large scale commercial applications. Includes wall mounting hardware.

HDMI Repeater 4K x 2K \ 60hz 4:4:4 up to 165 ft. | 40-HDMIR-1 Calrad Electronics

This Calrad 40-HDMIR-1 inline repeater will amplify any standard HDMI signal up to video resolutions of 4K@60hz. Simply connect this unit in between two HDMI cables, (the repeater inline closest to display end) and your connection will instantly be supercharged. This repeater will digitally amplify and boost the HDMI signal, which in turn will significantly extend the maximum transmission distance between your source and display devices.

95-1046-S Calrad Electronics

Stereo RCA Audio Balun Adapter over Single CAT5E/6 Cable

95-1046-S-1 Calrad Electronics | Stereo Analog Audio Ground Isolation Balun with IR

Stereo Analog Audio Ground Isolation Balun with IR, RS232, RS422 or RS485 Connectivity - Sold in Pairs.

This Calrad 95-1046-S1 Audio-IR-Data Pigtail Balun is ideal for residential, corporate A/V, schools, home theater applications and any other situation involving structured audio distribution that transmits stereo audio signals via Cat.5e/6 UTP cable. This Balun provides a low cost and versatile UTP cabling solution for any analog audio distribution system. Each audio channel transmission signal is completely isolated with transformer based circuitry from start to finish eliminating any issues with ground loops or audio 60hz hums. The balun also has a single 3.5mm IR signal path for bi-directional signal communication and also a cable pair for data-control communication that supports RS232, RS422, RS485. Easy bi-directional connectivity either balun can act as a transmitter or receiver. Use standard pre-made Cat5e, Cat6 cables or terminate your own cabling using the 568A standard start to finish or the 568B standard start to finish. Distances of up to 250ft., see detailed specifications below. Please Note! All 4 pairs \ 8 conductors of the RJ45 connector are used and no spare connectivity is available.

Tech Note: The RS232 Data wires can also be used for additional IR signals and low current Relay trigger connectivity

95-1146 Calrad Electronics | Component Video Stereo Audio Balun Over Single Cat5e Cable (Pair)

Calrad 95-1146 | Component Video Stereo Audio Extender Over Single Cat5e Cable - Sold as a Pair

Calrad’s new line of audio/ video baluns provide a simple low cost method of delivering composite video and stereo audio over UTP cable. 25k Gold plated jacks. Chassis: ABS Plastic. Extend your Component Video + L, R Audio overCat5e/6.

HDMI over Single Coax Cable Extender

• The Vanco 280567 Allows HDMI Audio/Video and IR signals to be transmitted over a single coax cable
• Wideband IR system that allows for controlling the source at the display location (1 IR RX and 1 IR TX included)
• Transmission Range: Extends 1080p resolution up to 100m/328ft over a single RG6 Coax cable; Extends 1080p resolution up to 60m/196ft over a single RG59 Coax cable
• Works with HDMI and HDCP compliant devices
• Supports up to 1080p High Definition resolution
• Compact design for an easy and flexible installation
• Power Supply: DC 5V
• Dimensions: 3.2” W x .98” H x 1.6” D

Package Contents:

(1) 280567 [TX & RX]
(1) IR Blaster (TX)
(1) IR Receiver (RX)
(2) DC 5V in line power supply
(1) Rack-mounting ear set or adhesive for mounting
(1) User Manual

HDBaseT Extender with POE (330ft/100m)

• The Vanco 280626 Features HDBaseT Technology, optimized for whole-home or commercial distribution of uncompressed high-definition signals at twice the distance of HDMI cables without degradation
• HDBaseT Extender can connect uncompressed full HD digital video, audio, IR, 100BaseT Ethernet, and various control signals via RS-232 through a single 330ft/100m Cat5e/Cat6 cable
• Features Power Over Ethernet (PoE), integrates power into the Cat5e/6 cable, requiring no power supply for either the Transmitting unit or Receiving unit (opposite of unit that is plugged in to power)
• 4K2K (2160p @30hz) resolution compatible
• HDBaseT Technology that supports HDMI Deep Color, 3D, and up to 4K2K resolution @ 30hZ
• Transmission Range: Extends 1080p resolutions up to 330ft (100m) over a single Cat5e/6 cable and 2160p/30hZ (4K2K) resolutions up to 230ft (70m)
• HDCP Compliant
• EDID pass through
• CEC support
• Auto equalization
• Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
• DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
• Wideband IR signal from 20KHz to 60KHz
• Bi-directional IR pass-through
• Wall mountable housing design for a quick and easy installation
• Dimensions: 4.2” (107mm) W x 1” (27mm) H x 4.2” (107mm) D

Package Contents:

(1) 280626 (Transmitter and Receiver)
(1) IR Receiver (RX)
(1) IR Transmitter (TX)
(1) DC 12V, 2A power supply
(1) Rack-mounting ear set
(1) User Manual

Calrad 92-180 IR Distribution System - 5 Port Kit

The Calrad 92-180 is a IR Connecting hub with two 3.5mm Jacks to connect two IR Receivers. Designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-180 has the ability to send IR signals to 4 sources using a single emitter or 8 sources if double IR emitters are used. One Port is an IR Blaster. Three colored LED indicators show power status, IR signal and IR confirmation.

Product No Longer Available - See Calrad 92-180A

Calrad 40-2000 HDMI Extender up to 150ft. over a single UTP Cable

Calrad 40-2000 HDMI Extender up to 150ft. over a single UTP Cable.

• Extend up to 150-ft Max with CAT6 @1080p or CAT5e up to 110-ft
• EDID learning capability to guarantee hand shaking
• 1 USB Power Interface Cable to Power the receiver from a USB Port on the TV
• Rack Ears and Velcro adhesive included
• Metal Case with LED Indicator

Calrad 40-2000-IR HDMI & IR Extender up to 150-ft over single UTP Cable

Calrad 40-2000-IR HDMI & IR Extender up to 150-ft over single UTP Cable.

• Extend up to 150-ft Max with CAT6 @1080p or CAT5e up to 110-ft
• Bidirectional IR control with independent IR RX and TX jacks
• Interface Cable(Included) for direct IR control from Home Automation Control System's
• EDID learning capability to guarantee hand shaking
• 1 USB Power Interface Cable to Power the receiver from a USB Port on the TV
• 2-IR Emitter and 2-IR Received Included
• Metal Case with LED Indicator

92-181 Calrad IR Receiver Cable for 92-180A

Calrad 92-181 IR Receiver Cable for 92-180A

92-180-A Calrad IR Repeater Kit

Calrad 92-180-A IR Repeater Kit, 6 Port Distribution System

This Calrad IR repeater system extends IR (Infrared) remote control signals from one location to another. The IR receiver is typically located on a TV display and receives IR signals from remote controls up to maximum of 33 ft. and re-transmits them to the 6 Port IR distribution block. The 6 x standard IR emitter ports re-transmits the IR signals to multiple pieces of individual equipment using 3 x dual non-flashing IR emitters. This 92-180A IR distribution block requires a 12Vdc power supply (included) or can work through the optional USB type �B� port on 5Vdc, See Diagram 1A below for typical configuration and hookup. Two Additional IR receiver ports are available for adding two additional IR receivers for multi-room control, Calrad IR Receiver part number, 92-181.

280721 Vanco Super IR Receiver

Vanco 280721 Super IR Receiver

• IR Transmitters- Receivers- and Adapters are compatible with Vanco’s HDMI Matrixes- Splitters- Switchers- and Extenders that are enabled with Super IR technology
  
• HDMI IR Adapter Allows for IR Control over any Vanco HDMI Cable
  
• Extends IR Signals more than 100m/328ft
  
• Supports Dual Band IR
  
• HDMI IR Adapter is IR or CEC Configurable

280720 Vanco Super IR Transmitter

Vanco 280720 Super IR Transmitter

• IR Transmitters- Receivers- and Adapters are compatible with Vanco’s HDMI Matrixes- Splitters- Switchers- and Extenders that are enabled with Super IR technology
  
• HDMI IR Adapter Allows for IR Control over any Vanco HDMI Cable
  
• Extends IR Signals more than 100m/328ft
  
• Supports Dual Band IR
  
• HDMI IR Adapter is IR or CEC Configurable
  

HDMI Over a Single or Multimode LC Fiber Cable Extender | 40-2020 Calrad Electronics

Calrad 40-2020 | HDMI over a Single (Single or Multi Mode) LC Fiber Cable (1,000 ft.), 4K x 2K \ 60hz (4:4:4), HDR Extender with ARC, Bi-Directional IR\RS232 (Sold in Pairs)

Calrad's fiber solution provides long distance full spec., HDMI 4K uncompressed signal transmission for pristine video signal delivery. 55-690 Series Single Mode Fiber, available in lengths of 50 ft., 100 ft., 150 ft., 200 ft., 300 ft.. Use Calrad's 72-209 Fiber Optic LC Female to LC Female Coupler to make different lengths of fiber cables.

Package Contents: 1 x 40-2020 Transmitter, 1 x 40-2020 Receiver, 2 x DC Power Supplies, 1 x IR Receiver, 1 x IR Emitter

HDMI Transmitter & Receiver, 2-Wire, Pair with IR, RS232 | 40-204 Calrad Electronics

The Calrad 2 Wire technology system provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. With the 40-204 many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter.

HDMI Receiver, 2-Wire, with IR, RS232 | 40-204R Calrad Electronics

The Calrad 40-204R is used with the 2 Wire technology system that provides many useful features and options to send up to 1080P video, IR and RS232 control signals together over virtually any 2 wires. Our high speed balanced circuitry design for signal delivery is not polarity sensitive and can be wired terminal to terminal or reversed. A HDMI loop output is provided on the transmitter, eliminating the need for a separate HDMI splitter, this HDMI output allows the signal to pass on to 3rd party hardware. Easily send RS232 signals bi-directionally using a 3 position removable terminal block, that can be wired for one way or two way, (Full Duplex) communication. Many different types of cabling can be used to communicate between the transmitter and receiver providing a lot of flexibility solving complicated wiring issues for each type of installation. New or legacy wiring is possible without the worry of shielded or unshielded cables. Signals can easily be sent over Cat3; Cat5e; Cat6; RG59; RG6; Telephone Cable; Audio-Video Cable; Speaker Cable; Alarm Cable; Low voltage power cable. Reliable signal transmission up to 1,000 ft., signal length may vary based on the quality and wire gauge of the cable used. A single 40-204 transmitter can send signals to 4 separate receivers using part number 40-206 4 port 2 wire splitter. Check out our new MagWire miniature 2 conductor 45 gauge cable that is available in various lengths and provides unique problem solving solutions for running this cable.

Product No Longer Available - *See 40-204

Signal Splitter, 2-Wire, 4 Port | 40-206 Calrad Electronics

Calrad 40-206 | 1080P (2 Wire 4 Port Signal Splitter): This splitter uses small terminal block connectivity to distribute 2 Wire signals, provides a simple method of connecting a single 40-204 2 Wire transmitter to four 40-204 2 Wire Receivers for signal distribution. In specific configurations and shorter distances, up to six 40-204 Receivers may be connected to the 40-206 Splitter. Ports 1-4 are for standard connectivity, ports 5-6 expansion ports are available for specific configurations, please consult Calrads tech support for further details. Easily mounts with double stick adhesive tape, (Included) or easily attached to wiring harnesses or rack hardware by using cable ties.