Paladin PA1543 LAN ProNavigator Tester

Description:

Test data & telephone cable for proper pairing for EIA/TIA-568A & B, Token Ring, 10 Base T & common Cat5,Cat5e, Cat6 configurations. Also tests continuity of 50 & 75 ohm coaxial cables with BNC terminations.

Features:

• One-button, simple testing (PASS/FAIL or fault find) to detect: good connections, opens, crossed wires & split pairs
• Traces wires with tone & remote lights
• Quick fault analysis
• Compact & lightweight
• Comfortable to hold
• Low battery test
• Auto-off to preserve battery
• Lanyard holes embedded in case to attach to wrist or belt

Advantages:

• Combination UTP/STP & coaxial cable tester for patch cords or installed cable runs
• Simple PASS/FAIL test results in one second - quickly move on the next test site
• Test status lights at both ends (main unit & remote)
• Generates oscillating audio tone for use with tone probes to locate cables
• Includes 9V battery & belt clips

Technical information:

Main Unit
Weight 8 oz (228 g)
Dimensions (in) 3.45 x 2.9 x 1.85
Dimensions (mm) 88 x 74 x 47
Remote
Weight 2 oz. (57 g)
Dimensions (in) 3.45 x 1.6 x .9
Dimensions (mm) 87 x 41 x 2

Product No Longer Available - *See Paladin Tools PA901066 for replacement

Paladin PA1573 Tone & Probe Plus Cable-Check

Description:

Identify connector & cable pin-out with true cable mapping for both patch cords and installed cables. Also perform full-range continuity testing, line condition, signal tracing & wire identification with tone generator and tone probe cable tracer.

Features:

• RJ45 LAN Cable-Check mode is a true cable mapper that identifies:
  • Open, crossed and shorted connections
  • Connector and cable pin-out
  • Clear LED display for each pin and shield
  • Shielded RJ45 modular plug socket
• Features automatic display of mapping with dual speeds: slow or fast
• Telephone Test Set & Tone Probe Cable Tracer:
  • Check polarity of telephone power line
  • View telephone line status: dial tone, ringing line or busy line
  • Provides talk power for telephone lines & butt set use
  • Selectable dual/single tone application for balanced & unbalanced circuits
  • Four tone generator patterns
  • Tests continuity of wires, cables & loads
  • Tone generator features auto-off function
  • Locate patch and termination poing of wire
  • Quickly identify cable pair carrying signal
  • Inductive, high sensivity probe
  • Jack for headset
  • Audible speaker with adjustable volume control enables use without a butt set

Advantages:

• Includes 2 RJ45 shielded patch cords, RJ11 cord with alligator clips, 2 9V batteries & durable, nylon carrying case with belt loop

Product No Longer Available

PA1574 Greenlee LAN Cable Checker

The Greenlee PA1574 is a continuity tester for UTP and flat satin cables with RJ45 terminations. Tests both data & telephone connection schemes including patch cords & installed cables.

Features:

• Identifies good connections, opens, shorts & cross-connections
• Two scan speeds: slow or fast
• Two RJ45 patch cords included
• 9V battery included
• Contained in durable nylon carrying case with belt loop

Note: Will also test RJ11 connections with RJ11 adapter which is not included.

Paladin PA1576 Data/Link ID and Cable-Check

Description:

This handy unit is a multi-purpose continuity tester and network identifier.

Features:

• Tests UTP, STP & flat satin cables with RJ45 terminations
• Tests both data & phone connection schemes including patch cords & installed cables to identify:
  • Good connections
  • Opens
  • Shorts
  • Cross-connections
• Identifies data & link transmission speeds with real time detection: 100 MB & 10 MB
• Detect PC (NIC) and HUB data transmissions and PC (NIC) & HUB NLP or FLP link pulse

Advantages:

• Multi-purpose tester at an affordable price
• Selectable scan speed: fast or slow
• Identifies cross-over telephone connections
• Maps LAN cabling or patch cords
• Low-battery detection in LAN ID mode
• Includes 2 RJ45 patch cords, 9V battery & durable, nylon carrying case with belt loop

Product No Longer Available

Paladin PA1577
PC Cable-Check Pro

The Paladin PA1577 is  a universal tester that maps cables, detects good connections, opens, shorts or crosses. It works with over 20 types of cables including: LAN & telephone, Serial, coaxial, USB, VGA, Mini-USB, S-video, FireWire, PS/2 keyboard & parallel printer.

* Paladin PA1577 No Longer Available
See Eclipse Tools 902-400

Paladin PA1594 LAN & A/V Cable-Check

Description:
Quickly and easily test RJ45, cable TV "F", RCA, and BNC cabling used in smart home installations.

Features:

• Tests RJ45 patch cords and network installations to identify good connections, opens, shorts or cross-connections
• Connection type:RJ45 UTP or STP modular plug & cable TV "F" coaxial
• Identifies data and telephone connection schemes
• Maps cable pin-out
• Tests continuity of cable TV cables and installed cable runs
• Battery life for 15 hours continuous use
• Max. length: 1,650' (500 m)

Advantages:

• Combination network and coax tester
• Automatic scanning
• User selectable slow or fast speeds
• Quickly check cable installations and patch cords
• Easy-to-use with clear LED read-outs
• Includes: 2 RJ45 patch cords, 75ohm male terminator, CATV "F" Female adapter, 2 CATV "F"(Male) to BNC(Female) adapter, 2 CATV "F"(Male) to RCA(Female) adapter, 9V battery and durable nylon carrying case

Type:
Cat5, Cat5e, Cat6
RG6, RG6 Quad, RG59

Connector style:
RJ45
CATV "F"
RCA
BNC

Paladin PA901066 LAN ProNavigator Tester and Remote Kit

If you're a technician on the go, you need the LAN ProNavigator from Paladin Tools! Two-piece tester includes main unit and remote with test results at both ends.

Features:

• One-button, simple testing (PASS/FAIL or fault find)
• Traces wires with tone & remote lights
• Quick fault analysis on coax & data cables
• CAT-5, CAT-5e or CAT-6 (UTP/STP) cable testing
• Detects Opens, Shorts, Crossed Wires & Split Pairs
• Compact & lightweight, comfortable to hold
• Designed & manufactured in the USA
• Test status lights at both ends (main unit & remote)

Specifications:

• Simple PASS/FAIL test results in one second allows technicians to quickly move on to the next test site.
• Generates oscillating audio tone for use with tone probes to locate cables.
• Tests data and telephone cables up to 320 feet (100 meters) for proper pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and common Category 5 configurations.
• Tests unshielded UTP and shielded STP data cable.
• Detects good connections, open connections, crossed wires and split pairs.
• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320 feet (100 meters) for continuity.
• Tests coaxial cable types RG58, RG59, RG6, RG6 Quad, Belden 8281, RG8, RG11 and more.
• Shows test results at both ends of cable.
• Belt clips provided and lanyard holes embedded in case to attach to belt or wrist.
• Uses standard 9-volt dc battery with auto-off function to preserve battery life.
• One-year warranty

Dimensions:(in) Main: 3.45" x 2.9" x 1.85" Remote: 3.45" x 1.6" x 0.9" Kit: 8.5" x 7.6" x 3"
Dimensions:(mm) Main: 88 x 74 x 47 Remote: 87 x 41 x 24

Kit Includes: LAN ProNavigator test set (main & remote), 2 RJ45 patch cords, 2 BNC coaxial cables, 2 CATV "F"-to-BNC adapters, 1 BNC/BNC adapter, 1 shielded RJ45 coupler, 2 belt clips in durable case.