VDV500-820 Klein Tools Tone and Probe Test Kit

The Klein Tools VDV500-820 Tone & Probe Pro Kit is designed to cater to both professional and home users. With its exceptional cable tracing capabilities, you can effortlessly trace cables spanning over 1,000 feet. With the VDV500-820 model the Bed of Nails clips ensure secure attachment to wires, while the RJ11 plug seamlessly connects to telephone and RJ45 data jacks, allowing you to tone wire pairs with utmost ease.

77M Greenlee Classic 77 Series Tone Generator

Greenlee 77M Classic 77 Series Tone Generator

Permits technicians to identify the conductor within a bundle, at a cross-connect point or at the remote end. Can be used on twisted pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energized AC wiring and most other wiring.

Features: 77M 77HP 77HP/6A 77HP/6AC 24" test leads (clips) Constant/warble tone Continuity testing Polarity testing Talk battery supply Line 1 modular test lead (RJ-11) 3-color LED (identifies AC ring voltage) Weather resistant design Bent nose clips with "bed-of-nails" penetrator Cloth test leads

Specifications: Power Requirements One 9V battery, nominal life, 50 hrs Transmitter Frequency 900/1100Hz alternating, 900Hz constant nominal Transmitter Power into 600 ohms 7 dBm Voltage Protection at 600 ohms in CONT 52 VDC (77HP/6A 60 VDC) (all units provide higher voltage protection in OFF/TONE modes) High-impact ABS Case 1.25 x 2.25 x 2.5, 24" test leads, 4.5 oz. w/battery

Greenlee-Progressive 600LS Tone Test Set

The 600LS Tone Test Set is Tempo's most comprehensive, "must-have" tool for professional telecom / datacom service and repair.

Features: Traditional alternating tone signal for wire identification Line 1 & 2 polarity testing with 4-conductor modular plug Audible line condition testing; level indicates dead, off-hook and working lines Improved Talk battery supply for communication over inactive pairs Audible resistance level measurement Time & test functions using either modular lug or 24" alligator clip leads

Specifications: Power One 9V battery, nominal life 100 hrs Transmitter frequency 900/1100 Hz alternating nominal Transmitter power into 600 ohms 7dBm Talk battery into 600 ohms 10 VDC Voltage protection at 600 ohms in RES mode 52 VDC (higher in other modes) Case High-impact ABS case

Product No Longer Available

Greenlee-Progressive 77GX Professional GX Series Tone Generator

The 77GX Professional Series generates tracing tones for remotely identifying wires with a tone probe or butt set.

Features: Microprocessor-controlled circuitry for increased reliability Two-line polarity indication for fast outlet identification Automatic shutoff to prevent battery drain Snag-proof boot prevents broken plug tabs Convenient wrist/hanging lanyard

Specifications: Three distinct, selectable tone signal outputs for multiple line identification Two selectable tone power outputs for use on open and shorted pairs Independent continuity test function Independent talk battery supply with higher output voltage Fixed alligator clips and removable modular plug for multiple connection options

Greenlee-Progressive 77HP-G/6A Tone Generator with Bent Nose Clips w/Bed-of-Nails Penetrator

Permits technicians to identify the conductor within a bundle, at a cross connect point or at the remote end. Can be used on twisted-pair wiring (telecom, datacom, etc.), single conductors, coaxial cables, de-energiz-ed AC wiring and most other wiring.

Features: 77M 77HP 77HP/6A 77HP/6AC 24" test leads (clips) Constant/warble tone Continuity testing Polarity testing Talk battery supply Line 1 modular test lead (RJ-11) 3-color LED (identifies AC ring voltage) Weather resistant design Bent nose clips with "bed-of-nails" penetrator Cloth test leads

Specifications: Power Requirements One 9V battery, nominal life, 50 hrs Transmitter Frequency 900/1100Hz alternating, 900Hz constant nominal Transmitter Power into 600 ohms 7 dBm Voltage Protection at 600 ohms in CONT 52 VDC (77HP/6A 60 VDC) (all units provide higher voltage protection in OFF/TONE modes) High-impact ABS Case 1.2 x 2.25 x 2.5, 24" test leads, 4.5 oz. w/battery

Contact Us for The Best Price

Greenlee-Progressive PE620 Alarm Loop Verifier / Tone Generator

Designed specifically as a security and alarm continuity tester, the PE620 Loop Verifier can be connected to a Normally-Open or Normally-Closed loop pair and provides a distinct audible tone when the alarm condition occurs. Latching feature identifies intermittent failures (swingers) and confirms operation of switches at remote locations. In latching mode, the Loop Verifier will catch the alarm condition and continue until the tester is reset.

Features: As a tone generator, this Loop Verifier provides a traditional variable tone that can be applied using the 24" red & black test leads or 6-position modular plug, included. The magnetic, back plate allows convenient mounting directly to control panel cabinets & doors.

Specifications: Electrical Power: One 9V battery Battery life (nominal): 100+ hours tone, 15+ hours audible signal Tone frequency: 900/1100 Hz alternating, nominal Tone output: +3 dBm into 600 ohms Continuity: N.O. on <50k ohms, off >80k ohms; N.C. on >120k ohms, off <80k ohms Latch sensitivity: Any occurrence >100 microseconds Case: High-impact ABS case Weight: 5.5 oz w/battery

Contact Us for The Best Price

TNP700 Platinum Tools Net Prowler

The Platinum Tools TNP700 Net Prowler combines network testing (physical layer and link), cable verification & troubleshooting and PoE voltage testing in a handheld tester with a full-color display; all with the capability of saving and printing tests results from a personal computer.

TNC950AR Platinum Tools Net Chaser Ethernet Speed Certifier & Network Tester

The Platinum Tools Net Chaser™ Ethernet Speed Certifier & Network Tester offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cable wiring, and ensuring that cables are able to support the speed capabilities of active equipment.

• Speed Certification to IEEE standards 802.3
• Cable testing to TIA568A/B

Part Number Platinum Tools TNC950AR

TNC950DX Platinum Tools Net Chaser Ethernet Speed Certifier & Network Tester Deluxe Kit

The Platinum Tools Net Chaser™ Ethernet Speed Certifier & Network Tester offers a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cable wiring, and ensuring that cables are able to support the speed capabilities of active equipment.

• Speed Certification to IEEE standards 802.3
• Cable testing to TIA568A/B

Part Number Platinum Tools TNC950DX

TP500C Platinum Tools LAN Seeker Cable Tester

The Platinum Tools LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. An easy-to-use professional grade tool, the LAN Seeker is a must have for residential and commercial cable installers. When the unit senses a connection between the main and remote unit, the battery-saving auto-on feature initiates test results within 2 seconds. The TP500C tester automatically powers off within 5 seconds of the cable being disconnected. LAN Seeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs.

• Displays cable test results on main and remote units in less than 2 seconds
• Immediately detects shorts by just plugging in one end of a cable to the tester
• Identifies shorts, opens, miswires, reversed and split pairs
• No on/off switch, automatically starts test when a connection is sensed between main and remote unit
• Debug mode diagnoses and displays faults one pair at a time
• Includes tone generator
• Self-stored remote

T119C Platinum Tools VDV MapMaster Voice, Data and Video Tester

The Platinum Tools T119C VDV MapMaster combines continuity testing, mapping and tone generator functions into a single unit. Capable of identifying and mapping 19 locations at one time. Whether your jobs are commercial or residential, the versatility of the VDV MapMaster makes it an installers best friend!

• Tests Voice (6 wire), Data (8 wire) and video (coax)
• Easy to read, extra large 7-segment LCD screen with large icons
• Tone generator with selectable tone cadence and selectable pins carrying tone
• RJ (Voice & Data) master remote stores in bottom of case
• Map 19 locations at one time, remotes sold separately
• Tests and indicates pins with shorts, opens reversals, miswires and split pairs
• Displays 'Pass' icon for correctly wired T568A/B 8 & 6 pin and crossover/uplink
• Low power consumption for long battery life
• Auto Power-Off
• Made in the USA

Application:

• Tests CAT-6, Cat-5e, Cat-5, Cat-4, Cat-3 and coax cables
• Tests shielded cables
• Mapping - video and data cables can be connected to their respective remotes at the same time to improve testing efficiency of 'tech' cable (both data & coax cables in one jacket)
• Patch cables may be tested without removing the master remote from storage
• Mapping - optional data and video, custom ID remotes (numbered 1 thru 19) for locating cable runs to wall outlets are available (see accessories)
• Cable test results displayed in wire map format with connector pin numbers
• Voltage detection warning icon
• LOOP ON - sets up continuous mode which is useful for trouble shooting intermittent problems
• RJ Cable Length: 1000'
• Minimum cable length for split pairs detection. 1.5 feet
• Maximum coax cable length: Cable resistance varies.
• Size: 6.4 x 2.8 x 1.4 inches
• Weight: 9.0 oz. (Including battery and remote)
• Operating Temperature: 32 to 122 F
• Storate Temperature: -4 to 140 F
• Humidity: 10% to 90% non-condensing
• Battery life active: 425 hours (9V alkaline)

Product No Longer Available

T129K1 Platinum Tools VDV MapMaster 2.0 Kit

The Platinum Tools T129K1 VDV MapMaster 2.0 Tester combines continuity testing, mapping, tone generation and length measurement functions in a single tester. This kit includes the tester and all the accessories required for voice, data and video testing & mapping in the field. It's packaged in a rugged double-walled, blow-molded case with custom cut out, high density EVA foam to help protect your equipment for years to come.

Kit Includes:

• VDV MapMaster 2.0
• Case & Insert Foam
• RJ45 #'s 1-12 Remote Set
• Coax F #'s 1-8 Remote Set
• RJ45 Port Saver
• RJ45 to Alligator Clips Cable
• NO-Fault Cable
• F Female to F Female Adapters, set of 3
• BNC Female to F Female Adapter
• BNC Female to F Male Adapter
• 9V Battery
• Instruction Manual

Product No Longer Available

T130 Platinum Tools VDV MapMaster 3.0 Cable Tester

Platinum Tools T130 VDV MapMaster 3.0 Cable Tester

The VDV MapMaster 3.0 combines continuity testing, mapping, generating tones and length measurement functions into a single easy-to-use unit for installation, troubleshooting, and maintenance for telco, network, or coax cable. The back-lit display, glow-in-the dark keypad and a built-in flashlight helps you to work in the dark. Whether your jobs are commercial or residential, the versatility and added features of the VDV MapMaster 3.0 makes it a best value cable verifier for the professional installer!

• Tests to T568A/B wiremap configuration: shorts, opens, miswires, reverses and split pairs
• Single-ended Testing for Shorts & Split Pairs
• Measures Length in Feet/Meters
• Identifies cable location on active ports using flashing Port Link Light
• Easy to read, backlit LCD screen with large icons, glow-in-thedark keypad and built-in LED flashlight for use in dark areas
• Identify up to 20 network or coax cable runs at a time
• Audible Tone Generator, 4 selectable cadences
• Tests Voice (6 wire), Data (8 wire) and Video (coax)
• Works with Cable Tester Smart Remotes (#1-8)
• Made in USA with global components

T130 - Main Unit and Remote Only

T130K1 Platinum Tools VDV MapMaster 3.0 Cable Tester Kit

Discover the Power of Efficiency with Platinum Tools T130K1 Termination Kit.

The Platinum Tools T130K1 Termination Kit is the ultimate solution for professionals seeking efficient and reliable termination of data cables. This comprehensive kit provides everything you need to streamline your termination process and achieve superior results.

Featuring high-quality tools and components, the T130K1 Termination Kit ensures precise and consistent terminations every time. From crimping to cutting and stripping, each tool is meticulously designed to deliver exceptional performance and durability.

With its ergonomic design and user-friendly features, this kit enables comfortable and efficient operation, reducing hand fatigue and increasing productivity. Whether you're working on Ethernet, voice, or data cables, the T130K1 is your go-to toolset for accurate and efficient terminations.

Platinum Tools is a trusted name in the industry, known for their commitment to innovation and quality. The T130K1 Termination Kit exemplifies their dedication to providing professionals with the tools they need to get the job done right.

Upgrade your termination capabilities with the Platinum Tools T130K1 Termination Kit. Experience the convenience, precision, and reliability that professionals trust. Invest in this essential kit today and take your cable termination skills to the next level.

T129 Platinum Tools VDV MapMaster 2.0

The Platinum Tools T129 VDV MapMaster 2.0 combines continuity testing, mapping, tone generator and length measurement functions into a single unit. Capable of identifying and mapping 19 locations at one time. Whether your jobs are commercial or residential, the versatility & added features of the VDV MapMaster 2.0 makes it an installer's best friend!

• Measures the entire length of a cable and/or individual wire pairs
• Tests Voice (6 wire), Data (8 wire) and Video (coax)
• Easy to read, extra large 7-segment LCD screen with large icons
• Tone generator with selectable tone cadence and selectable pins carrying tone
• RJ (Voice & Data) master remote stores in bottom of case
• Map 19 locations at one time
• Tests and indicates pins with shorts, opens, reversals, miswires and split pairs
• Displays 'Pass' icon for correctly wired T568A/B and crossover/uplink
• Displays 'Pass' icon for correctly wired 6-pin telephone plus 'Rev' for reverse-pinned
• Low power consumption for long battery life
• Auto power-off

Product No Longer Available

21025 Platinum Tools RJ-45 PortSaver

The Platinum Tools 21025C RJ-45 PortSaver extends the life of your tester by using the RJ45 PortSaver as your sacrificial cable. This eliminates the wear and tear from constantly plugging in and out of the tester port.

Tone Generator and Probe Kit

Platinum Tools TP150

400-011 Eclipse Tools Tone Generator & Probe Kit

Eclipse Tools 400-011 Tone Generator &  Probe Kit

• Fast, accurate wire identification
• Rugged industrial design
• Sends tone to identify wires
• Three selectable tone outputs
• Two-line polarity indication
• Continuity test
• Adjustable volume controlVisual signal strength indicationPowerful speaker for noisy environments
• Recessed telephone test set connectors

Tone Generator
Tone frequency: 1kHz
Max. testing distance: 1.5km
Max. working current: ≤20mA
Tone mode: One / Two-note tone
Compatible connectors: De-energized AC wire, telephone/twisted pair wire, all voice
Function selection: TONE/OFF/CONT
Continuity test: 1 LED (≤10Ω), Coaxial cable & solid/ stranded wire by alligator clips patch cord
Max. signal voltage: 8Vp-p
LED indicator: Power indicator x1, Phone line poliarity indicator x1, Phone line status indicator x1
Live telecommunication equipment test and router test: Y
Voltage protection: DC 48V
Low battery indication: 7V(Flashing power indication)
Battery type: DC9.0V � 1pc, not included
Dimension(L x W x H): 2.6 x 2.3 x 1.3 in.
Weight 0.14 lbs
Amplifier Probe
Frequency: 1kHz
Max. working current: ≤70mA
Function selection: 4 Position mode switch (LED, NCV, OFF, SCAN)
Earphone socket: 1
Signal status indication: LED & Buzzer
NCV  indication: LED (AC 90~1000V)
LED illumination: Y
Power indication: LED x 1
Battery type: DC9.0V � 1pc, not included
Dimension(L x W x H): 9.0 x 2.2 x 1.0 in.
Weight: 0.18 lbs
Accessory: Storage bag

902-228 Eclipse Tools All-in-One Toner & Probe Kit

Eclipse Tools 902-228 All-in-One Toner & Probe Kit

This Eclipse Tools Pro'sKit All-in-one Toner & probe Kit lets you use Toner and Probe to validate and troubleshoot wiring on RJ11/RJ45 cables and connectors, USB, F, BNC, and RCA connectors, and it also supplied with alligator clips to work with. The 902-228 Toner detects telephone and Ethernet service, indicates polarity and active line numbers on voice circuits, and indicates active pair number on Ethernet circuits. The 902-228 Toner and Probe also provide standard functions such as visual and audible signal strength indication, analog toning/detection, and continuity testing. It is ideal for all maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling , etc.

Transmitter Specifications:

Tone frequency: 1kHz
Tone mode: ONE/TWO-note tone
Compatible connectors: RJ-45/RJ-11/USB/F/BNC/ RCA/Alligator Clips
Continuity test: <300Ω
Talk battery voltage: 6V into 600Ω
Function selection: 5-position rotary switch
Cable map indication: 8 LED indicators
Voltage protection: 100V
Low battery display: 6.5V
Battery type: 9V (6F22), not included
Dimension (LxWxD): 5.5 x 2.8 x 1.2 in.

Receiver Specifications:

Frequency: 1kHz
Compatible connectors: RJ-45/RJ-11/USB/F/BNC/RCA
Ear jack: 1
Signal status indication: 8 LED indicators
Cable map indication: 8 LED indicators
Low battery display: 6.5V
Battery type: 9V (6F22), not included
Dimension (LxWxD): 9.8 x 2.0 x 1.3 in.

MT-7028 Eclipse Tools Network Tone Probe Kit

Eclipse Tools MT-7028 Network Tone Probe Kit

Easy to locate and verify the cable status and troubleshoot wiring for continuity, shorts, opens and crossover on RJ45 LAN cable Cat 5, 5e, 6, 7 (UTP/STP), RJ11/12 Telephone cable Cat. 3 (2/4/6 pin) & normal solid/stranded wire by alligator clips patch cord.

Ideal for all installation and maintenance fields of telecommunication, networking, datacom, Audio/Video, cable TV, and all weather cabling, etc.

Wire Tracing up to 3KM The tone and probe kit let you easily tracking wire directly in connection with live telecommunication equipment and router.

Cable Mapping & Status Indication up to 300M

• Fast/Slow scan function for choosing
• Display the result of pin to pin cable mapping
• Display cable status and troubleshoot wiring for continuity, shorts, opens and crossover.

Non Contact Voltage detection Tests voltage from 90 ~ 1000V, special design to make sure the power is off before testing for circuit protection.

Polarity indication Identify the telephone line polarity easily

Energy saving Automatically powers off after 1 hour of no operation