VMP DVR-MB1 Mobile/Rackmount DVR Lockbox

This VMP small lockbox is for mobile or rackmount applications. The DVR-MB1 can be mounted on four out of six surfaces allowing it to work in any location. The DVR-MB1 comes with one fan and has the option of mounting three additional fans for better themeral control. The DVR-MB1 is also rackmountable with a 2U height making it good for small storage applications.

• Interior dimension17" W x 13.8" D x 3" H
• Lockbox is mountable on 4 sides for mobile applications
• Rack mountable with a 2 RU overall height (3")
• Mounting strips included for DVR in mobile applications
• Removable lid secured with tamper proof hardware
• Single fan included and mounting locations for up to four fans (DVRMB1FAN)
• Key locked hinged front door
• Multiple vents with removable vent blockers for active or passive thermal management
• Black static resistant powder coat finish

Product Dimensions: 17.36" x 14.4" x 3.5"

Product Weight: 14 lbs

Shipping Dimensions: 18.75" x 14.6" x 4"

Shipping Weight: 15 lbs

VMP DVR-LB3 Low Profile DVR / Storage Lockbox

This VMP product is a low profile DVR lockbox designed for 19" equipment racks. It is 2 post or 4 post mountable with adjusting rear flanges to accommodate a variety of rack depths. The DVR-LB3 is designed for both active or passive thermal management to accommodate whatever situtation is neccessary.

• Interior dimensions 17.2" W x 21" D x 5" H
• Stand alone or rack mountable on 2 or 4 posts with a 3 RU overall height (5.25")
• Interlocking lift off lid
• Multiple vents with removable vent blockers for active or passive thermal management
• Single fan included with mounting location for second fan
• Key locked hinged front door
• Black static resistant powder coat finish

Product Dimensions (WxDxH): 19" x 21.2" x 5.3"

Product Weight: 24 lbs.

Shipping Dimenisons (WxDxH): 22.1" x 17.6" x 5.75"

Shipping Weight: 25 lbs

VMP DVR-LB1 DVR Lockbox W/FAX

• Interior dimensions 21" L x 21" D x 8" H
  
• Vented and includes fan for additional ventilation
  
• Interlocking lift off lid
  
• Key locked hinging front door
  
• Black powder coat finish
  

There are some environments where a quieter alternative to the standard lockbox cooling fan is desired. In these applications, the DVR-QFAN is a great low noise replacement.

-

VMP DVR-WA DVR Lockbox Wall Mounting Arms

This VMP product is a pair of heavy duty, easy to install DVR lockbox wall mounting arms.

• Designed to mount to 16" on center studs
• Works with the DVR-LB1 and DVR-LB2
• Load capacity - 50 lbs
• Black static resistant powder coat finish

Shipping Dimensions (WxHxD): 23.1" x 4.25" x 2.75"

Shipping Weight: 5 lbs

Should your lockbox fan need to be replaced or if you'd like to add a second fan to the DVR-LB3 for better thermal management, the VMP DVRLB1-FAN is your solution.

VMP DVRLB-LOCK Replacement Lock & Keys for DVRLB1, DVRLB3, DVRMB1 for DVR Lock Boxes.

Video Mount Products part number DVRLB-LOCK

VMP DVRLB-KEY Replacement Keys for DVRLB1, DVRLB3, DVRMB1 for DVR Lock Boxes

Video Mount Products part number DVRLB-KEY

VMP LCD-PV Public View LCD Monitor Mount Kit

This VMP Public View LCD Monitor Mount Kit holds most LCD monitors 10" - 37"

• LCD-2537CB
  • Modified with 2 mounting points for camera bracket
  • Rotates 360° / Adjustable tilt -5° to + 30°
  • Mast telescopes from 18" - 30"
  • Load capacity 75 lbs.
  • Black powder coat finish
• AK-1 & CP-1
  • Used together, these units allow ceiling to mount extension drop distances of almost any length using standard 1.5" N.P.T. plumbing pipe
• Universal Camera Bracket
  • Can be assembled into several different configurations uses industry standard 1/4" - 20 threading